Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CAME BRIDGE PSAP01A. We hope that this CAME BRIDGE PSAP01A user guide will be useful to you.
Lastmanuals help download the user guide CAME BRIDGE PSAP01A.
Manual abstract: user guide CAME BRIDGE PSAP01ABRIDGE PSAP07
Detailed instructions for use are in the User's Guide.
[. . . ] ) at terminal blocks L1-L2 and the inlet is protected with 1, 6A fuse. The command devices are low voltage and protected by a 1. [. . . ] 6A fuse, whereas the gearmotor and electric lock are protected by 5A fuses. The accessories’ total wattage (24V) must not exceed 40W. NB: If an NC safety contact (2-C1, 2-CX, 1-2) is opened, the LED will flash to indicate this fact. optional accessories - Gate open pilot lamp (3W). A lamp that signals the gate’s open position and that goes out when the gate is in the closed position. Powers the reduction gears through batteries in case of a power outage. After the power supply is restored, it also recharges the batteries. ) for re-closing during opening Contact (N. The AF board should ALWAYS be inserted when the power is off. ENGLISH
Keep the CH1 key pressed on the base card (the signal LED will flash), and with a key on the transmitter the code is sent, the LED will remain lit to signal the successful saving of the code (figure 1, pag. Perform the same procedure with the "CH2" key, associating it with another transmitter key (fig. CH1 = Channel for direct control of one function performed by the control unit on the gear motor ("open only" / "open-close" or "open-stop-close-stop", depending on the position of dip switches 2 and 3). CH2 = Channel for direct control of an accessory connected across B1-B2. If you wish to change the code on your transmitters in the future, simply repeat the procedure described above. [. . . ] CH2 = Channel for direct control of an accessory connected across B1-B2. If you wish to change the code on your transmitters in the future, simply repeat the procedure described above. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CAME BRIDGE PSAP01A
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CAME BRIDGE PSAP01A will begin.
