User manual CAME BXE241

[. . . ] The board is inserted and fastened to the ABS (S4339 or S4340) container with IP54 protection level, which includes an air recycling inlet and transformer (see page 16). [. . . ] ATTENZIONE: prima di intervenire I M P O RTA N T: S h u t o f f t h e m a i n s ATENCION: antes de actuar den- all'interno dell'apparecchiatura, power before servicing the inside tro del aparado, quitar la tensión of the unit. regulaciones - Tiempo de cierre automático; - Tiempo trabajo. 9) 8 Innesto scheda radiofrequenza (vedi tabella pagina 11) 9 LED segnalazione 1 Terminal block for external conections 2 Line fuse, 5A 3 Fuse on accessory power line, 1A 4 Radio-code save button 5 Trimmer for adjustment operating time 6 Trimmer for adjustment automatic closing 7 2-dip function switch (see pag. B for any subsequent settings on different channels. Keep the "PROG" key pressed on the base card, the signal LED will flash (see fig. 1), and with a key on the transmitter the code is sent, the LED will remain lit to signal the successful saving of the code (figure 2). [. . . ] It is forbidden to market/use product/s that are the subject of this declaration before completing and/ or incorporating them in total compliance with the provisions of Machinery Directive 98/37/CE Signatures of the Representatives … comply with the Italian National Legal Provisions that transpose the following Community Directives (where specifically applicable): MACHINERY DIRECTIVE 98/37/CE LOW VOLTAGE DIRECTIVE 73/23/EEC - 93/68/EEC LECTROMAGNETIC COMPATIBILITY DIRECTIVE 89/336/EEC - 92/31/EEC R&TTE DIRECTIVE 1999/5/CE TECHNICAL MANAGER Mr. [. . . ]