Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CAME CAT. We hope that this CAME CAT user guide will be useful to you.
Lastmanuals help download the user guide CAME CAT.
Detailed instructions for use are in the User's Guide.
[. . . ] : used thermosetting polyester-resin paint on all painted surfaces. To insure easy installation and conformance with current safety norms, we raccomend installation of CAME safety and control accessories. [. . . ] CAT X 1 ) Loosen the fixing screws and remove the casing. 3) Place the unit on the anchor plate and tighten the anchor bolts. 4) The exact length of chain required is calculated by subtracting 500 mm. From the net distance between the pillars. 5) Attach one end of the barrier chain to the coupling fitted to the service chain. 6) With the unit still in the open position, attach the other end of the chain (use the chain release) to the fixed chain mount on CAT 1. The preset, adjustable automatic closing time is automatically interrupted by the activation of any safety system, and is deactivated after a total stop command or in case of power failure; (inserting switch); - “Man present” operation (cut the board at the points indicated); - Selection of command sequence: -open-close-reverse; -open only. = Pre-flashing time in the closing phase: 0" to 5". The circuit is powered by the voltage indicaded (230V) on terminals L1-L2. the power input is protected by a 5A fuse. The low-tension controls (24V) are protected by a 1. The same LT power supply can be used to power the various accessories (radio controls, photocells, etc. [. . . ] ) for «re-aperture during closure» Contact (N. - Wire the electrical connections only on the terminal board for the pilot motor in the normal; - Connect motor 2° as shown in the diagram above. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CAME CAT
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CAME CAT will begin.
