User manual CAME DF18

[. . . ] Are working properly • Where necessary and in plain sight, apply the Warning Sings (e. ENGLISH Special instructions and advice for users • Keep the gate’s area of operation clean and clear of any obstacles. Trim any vegetation that may interfere with the photocells • Do not allow children to play with the fixed comBefore installing mand devices, or in the gate’s area of operation. Transmitters) away from the chiloutcome, do not proceed before having dren as well • Frequently check the system, to see whether complied with the safety obligations) any anomalies or signs of wear and tear appear on the moving • Make sure that the parts you intend to automate are in parts, on the component parts, on the securing points, on the good working order, and that they are properly balanced cables and any accessible connections. [. . . ] Returned goods shall be accepted by company only following a written agreement, and only for new and packaged goods. Any returned goods must be complete of their relative transport documents, showing the company’s written authorisation to accept the returned goods including the quality and quantity of the returned goods. The returned goods shall not be accepted by the company unless carried out in the above mentioned manner and, especially, returned goods shall not be accepted if received at any of the company’s premises. GUARANTEE The company guarantees the proper functioning of the products that it provides, as per the technical characteristics that are expressly shown on its products’ technical sheets. The guarantee shall not apply in the case of any environmental interferences of any nature, which could cause disturbances in the functioning of any existing or future installations (radio frequencies – proximity of electric power lines…). The guarantee does not cover the normal wear and tear of the equipment, or mistakes made during the mounting phase or due to maintenance flaws, and in any case it does not cover any cases in which flaws in the functioning can be traced back to factors stemming from anything other than manufacturing. The deadlines for filing a claim for any flaws or for the statute of limitations for actions to which the buyer is entitled are those foreseen by Italian law. The company at its own leisure, may decide to withdraw any goods supplied which it has ascertained as faulty, or decide to repair said ascertained flaws. The client may not request to be compensated for any indirect damages, missed gains, production losses, and in any case may not expect as compensation any sums greater than the value of the supplied components or products. REPAIRS Repairs to purchased items request by the client shall be carried out by the company following an agreement on the price of said repairs. In any case the expenses for labour and shipping (roundtrip) shall be borne by the client. 50/60 Hz Power Draw: 500 mA max Insulation class: II Protection rating: IP44 Weight: 60 Kg Suggested distance between one turnstile and another in case of multiple installation. 2 5 Application examples Warning: an exit fitted with a turnstile cannot be an emergency exit. There must always also be an emergency exit for physically impaired persons. 2 EX IT Multiple installation Platform installation 6 Installation Only skilled, qualified staff must perform the installation, in full compliance of the current legislation. Before installing the automated device, please: • Set up a proper omnipolar cut-off device, with contacts more than 3 mm apart, and power source isolation; • Set up proper tubing and conduits for the electrical cables to go through with enough protection from any mechanical damage; • Check that any connections within the container (made to give continuity to the protection circuit) have additional isolation compared to the other internal power conductors. 1 Tools and equipment Make sure you have all the tools and materials needed to carry out the installation in total safety and in compliance with current legislation. The figures shows examples of installers’ tools. eNGLISH Against the wall installation 6. 2 Positioning the turnstile Depending on the measurements of the transit opening, choose where to position the turnstile and any accessories. Set up electrical cable conduits next to the turnstile. If the floor cannot be dug, then use the (TRPE) platform to secure the turnstile and any accessories. [. . . ] Contact) Anti-intrusion sensors placed in line with the passage way, activate a Buzzer, in case of any climb-over attempts. Contact) Anti-intrusion sensors placed under the turnstile’s top cover, which activate the Buzzer, in case of any climb-over attempts. €“ 100mA + - Once the power is connected, wait 10 seconds before proceeding with any operations. 10 Safety instruction Warning: opening the turnstile only 60° will cause the tripod to automatically return. [. . . ]