User manual CAME FROG JC

[. . . ] The combined function allows you to control two barriers at the same time. Install the FROG JC board on both the barriers, connect the dedicated terminal boards (ref. [. . . ] , connected to terminals 1-2, stops both the barriers (if dip switch 6 is not set to ON) Botón N. PROCEDURE A - Install the AF board only on the MASTER barrier. B - Save the code of the radio transmitter on the motherboard. 2 ON - “Opening” command 2)The CH2 radio channel commands the MASTER barrier and the radio-control performs the “open-close-reverse” function 1)El canal radio CH1 controla el accionamiento de las barreras MASTER y SLAVE y el transmisor efectúa la siguiente función: Dip n° 2 OFF- Mando “abrir-cerrar-inversión” Dip n° 2 ON- Mando “abrir” 2)El canal radio CH2 controla el accionamiento de la barrera MASTER y el radiomando efectúa la función “abrir-cerrar-inversión” FROG JC Il canale radio CH1: dip n°2 = OFF esegue l’inversione della barriera. The impulse of the CH2 radio channel is not managed if there is only one barrier. With motor not running (barrier closed, open or after a total-stop command), all movement is prevented if the safety devices (e. Photoelectric cell with re-opening function), the device (e. To open both the barriers, activate the command device connected to terminals 2-3, with the barrier open, activate the safety device (compulsory stop button) connected to terminals 1-2 and run the command device connected to terminals 2-3P to open the second barrier. In the event of an emergency if you manually release the gearmotor using a key and move a barrier to its open position, the other one is released. ) stops both the barriers Botón (N. ) opens the MASTER barrier only Botón (N. ) opens the SLAVE barrier only Botón (N. [. . . ] 2 OFF- “Open-close-reverse” command Dip switch no. 2 ON - “Opening” command 2)The CH2 radio channel commands the SLAVE barrier and the transmitter performs the following function: Dip switch no. [. . . ]