User manual CAME FROG PAIR GATES

[. . . ] It is also equipped with a memory roll that enables you to make a back-up copy of all the transmitters saved. [. . . ] However, on the 2nd channel, it is possible to alternatively choose the “bistable” mode. 1 LED indicator 2 Pushbutton 1: channel 1 (CH1/OUT1) code storage or data transfer from the Memory Roll to the receiver 3 Pushbutton 2: channel 2 (CH2/OUT2) code storage or data transfer from the receiver to the Memory Roll 4 CLEAR pushbutton: cancel all the memory 5 Power supply/type of command selection dipswitch 6 terminal block for connections 7 Connector for inserting the memory roll 8 Memory Roll data archive (see Note 2 on the reverse) D Empfänger Rolling Code mit zwei Kanälen. A); 2 - Premere il tasto dei trasmettitori 2 - Press the pushbutton of the da memorizzare (fig. gB - Insert the Memory roll; - Inserire la schedina Memory; - Premere il tasto 1 e rilasciarlo dopo il lampeggio (5"). I the Memory GB - Insert pushbutton 1roll; release - Press and it once it starts flashing (5"). GB NOTE 2: The Memory Roll board must be inserted only for the procedures of data transfer from and to the receiver RE432-RC. [. . . ] At the end of these procedures, the board must be taken out and archived. [. . . ]