User manual CAME G0462

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CAME G0462. We hope that this CAME G0462 user guide will be useful to you.

Lastmanuals help download the user guide CAME G0462.

Download

Manual abstract: user guide CAME G0462

Detailed instructions for use are in the User's Guide.

 [. . . ]  distances "A" and "D" cannot be changed.  [. . . ] However,  be sure that the angle between the transmission arm and idle arm "ß" does not exceed 120° when the door wing is opened all the way,  and 15° when the door wing is closed. Note: The maximum load capacity of the system is reduced by 30% when the idle arm is fully extended. A maximum aperture,  ground anchor is necessary to keep the overstop from damaging the arm and motor. Also,  pay special attention to the height of the door: if the door is less than 2. 5 metres tall,  the gap (Lp) between upper edge of the door and the arm must be at least 30 mm (see figure). In this case,  use the bushing and oversized screw (M6 x 60,  UNI5933) supplied with the unit.  [. . . ] All data mentioned in the present booklet are for information only.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CAME G0462

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CAME G0462 will begin.