User manual CAME KIARO-24IN

[. . . ] , it meets the - Version left with end-stop during opening and closing; regulations in force, with IP54 protection level; KR 510 D - Guaranteed for 12 months, unless tampered with by unauthorized personnel. [. . . ] 4, otherwise it is necessary to intervene on the pillar so as to reach this measure. 4 Install the rear bracket while respecting distan-ces A and B (Tab. 3) between the hinge on the gate and the hole in the centre of the bracket (which is used to hold the gear motor). The rear bracket is equipped with additional holes to make installation of the gear motor easier, or to change the opening angle of the gate. 1); - for the cable connection, use the appropriate cable clamp (part. A) supplied, fixing it to the capacitor support (part. For the adjustments of the end stops, use a screwdriver on the notch of threaded bar A for OPENING, on threaded bar C for CLOSURE. - Insert key (A) in the keylock, turn it to allow the release lever (B) to unlock and remove the key (fig. [. . . ] - Lubricate the drawing head and the rest pins - Ceck the clamps screws; - Ceck the connection cable's soundness. [. . . ]