Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CAME KPX947. We hope that this CAME KPX947 user guide will be useful to you.
Lastmanuals help download the user guide CAME KPX947.
Detailed instructions for use are in the User's Guide.
[. . . ] VERSIONS: KR 300 S Left side model ; KR 300 D Right side model ; KR 310 S - Version left with end-stop during opening and closing; KR 310 D - Right version with end-stop during opening and closing; KR001 Personalised key lock. - Right version with end-stop during opening and closing; OPERATIONAL LIMITS: - Door height up to 3 meters; - Maximum opening of wing: 120°; - The values shown (see table 2 on page 3) refer to normal residential use; for more intensive use, these values should be reduced by 10 to 20%. [. . . ] - Right version with end-stop during opening and closing; OPERATIONAL LIMITS: - Door height up to 3 meters; - Maximum opening of wing: 120°; - The values shown (see table 2 on page 3) refer to normal residential use; for more intensive use, these values should be reduced by 10 to 20%. Make sure: - the structure of the gate is suitably strong and the hinges are lubricated; - the measure C is not above the value indicated in the “tab. 4, otherwise it is necessary to intervene on the pillar so as to reach this measure. 4
Install the rear bracket while respecting distan-ces A and B (Tab. 3) between the hinge on the gate and the hole in the centre of the bracket (which is used to hold the gear motor). A) supplied, fixing it to the capacitor support (part. For the adjustments of the end stops, use a screwdriver on the notch of threaded bar A for OPENING, on threaded bar C for CLOSURE. - Insert key (A) in the keylock, turn it to allow the release lever (B) to unlock and remove the key (fig. 2-3); then turn the release lever 90° in either direction (fig. - To relock the door, reset the release lever to the initial position (fig. [. . . ] 2-3); then turn the release lever 90° in either direction (fig. - To relock the door, reset the release lever to the initial position (fig. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CAME KPX947
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CAME KPX947 will begin.
