User manual CAME KRONO KIT

[. . . ] Unplug this apparatus during lightning storms or when unused for long periods of time. refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been 14. Spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. [. . . ] Open the package and verify the following contents: (4) Satellite speakers (1) Center Channel speaker (1) Subwoofer (2) 40’ (12m) speaker wires (3) 20’ (6m) speaker wires (1) 15’ (4. 6m) subwoofer cable (8) Rubber bumpers (used for wall mounting) (4) Satellite speakers Subwoofer (1) Center Channel speaker 3 Placement Options The MCS 160 satellites and center channel are designed to easily mount on the wall using the keyhole slot(s) on the back of the speaker. When mounting the speakers to the wall use the supplied rubber bumpers. The keyhole mounting option is similar to hanging a picture frame on a wall. Install a #8 screw (not included) into the sheetrock, making sure to go into a stud, and hang the speaker onto the screw head. If a stud is not available, a sheetrock anchor should be used to support the weight of the speaker. it is advisable to connect the speaker wire prior to wall-mounting. NOTE: Because there are so many different kinds of surfaces on which the speakers could be mounted, there is no one type of fastener that we could supply that would work in all the possible situations. So taking into account the surface the speaker is being mounted on, acquire the appropriate type of fasteners. If you’re not sure what type of fastener to use, take the mounting bracket to a friendly hardware store, tell them about the wall you’re mounting the speaker on, and ask them to recommend an appropriate fastener. Speaker Connections After your speakers are properly placed, you are ready to wire your system. Further adjust the Subwoofer Volume Control until you hear a match in volume between the main speakers and subwoofer. Ideally, bass response should not overpower the room but rather be adjusted so there is a natural blend across the entire musical range. digital Receiver Subwoofer Amplifier MCS 160 Polarity Control (0° or 180°): Selects regular (0°) or inverted (180°) phase for the subwoofer. Set this switch to provide the fullest, most dynamic bass. The effect of phase will be most audible on low-frequency percussion instruments or music with a continuously repeating bass line. Operation When using the MCS 160 in a Dolby® Digital or DTS™ home theater system, make sure all speakers are set to “Small”. When using the system in a Dolby Pro Logic® home theater system, make sure the receiver’s center channel mode is set to “Normal. € Some Dolby Digital equipped receivers/processors offer different setup options for each source or surround mode (e. In each case, follow your equipment’s instructions to ensure that the subwoofer output is turned on and that the speakers are set to “Small” in each mode. If your receiver has adjustable crossover settings, we recommend the subwoofer crossover be set at 150Hz. Refer to the owner’s manual for your AV receiver for any additional recommendations on system operation. [. . . ] If that is not possible, write to: Boston Acoustics, Inc. 100 Corporate Drive Mahwah , NJ 07430 USA Or contact us via e-mail at: support@bostona. Com We will promptly advise you of what action to take. If it is necessary to return your MCS 160 to the factory, please ship it prepaid. [. . . ]