User manual CAME MA7012

[. . . ] €•Connect the speaker for the left channel to the “L” terminal on the amplifier, the speaker for the right channel to the “R” terminal on the amplifier, making sure to check the polarities (“+” and “–”). (vC) ••Amplifiers have various speaker output terminals. [. . . ] €•If the bass sound is overemphasized when the speakers are installed directly on the floor, set them on concrete blocks or other hard stands. €•Note that placing the speaker on the same stand or shelf as a record player may result in howling. €•Also note that if there is a magnet or any device generating magnetic force nearby, interaction between this device and the speakers can cause the colors on the TV to become blotchy. WARNING •• e sure to fasten the speaker cables to a wall, etc. , to prevent B people from tripping over them or otherwise pulling on them accidentally, causing the speakers to fall. €•Be sure to check for safety after installing the speakers. Tighten the terminal by turning to the right and check that the core wire is not protruding from the hole. Once connections are completed, pull gently on the speaker cables to check that they are securely connected. NOTE ••Do not let the core wires of two speaker cables touch each other. Doing so will short-circuit the amplifier circuitry and damage the amplifier. ‘ ④ ⑤ A Foam plug Prise mousse Tappo di spugna 吸音スポンジ B Anti-slip pads Rondelles antidérapantes Tappo di spugna すべり止め Removing the Speaker Net ••The net on the front of the speakers can be removed. €•To remove, grasp both sides of the net and pull forward. [. . . ] NOTE ••Do not insert the foam plug too deep. The foam plug could fall in and get stuck inside. [. . . ]