User manual CAME MA7470

[. . . ] Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. [. . . ] Q0 Media indicators BD : BD DVD : DVD-Video, DVD-R/+R/-RW/+RW DVD AUDIO : DVD-Audio SUPER AUDIO CD : Super Audio CD CD : CD USB : USB memory device NET : NETWORK Displays the inserted media and contents via Network. (17) y Audio channel indicators Displays the number of audio signal channels during playback. Indd 41 2010/07/05 17:24:24 ENGLISH Rear panel For buttons not explained here, see the page indicated in parentheses ( ). (11) For software recorded in multi-channel, analog signals that have been down-mixed into 2 channels are output. NOTE • Do not touch the inner pins of the connectors on the rear panel. Electrostatic discharge may cause permanent damage to the unit. € Do not put your finger or foreign object in the fan opening. Doing so could cause injury or unit failure. Indd 42 2010/07/05 17:24:25 ENGLISH Remote control For buttons not explained here, see the page indicated in parentheses ( ). (14, 15, 16) NOTE • When power is in standby, press w and E4 to turn the power on. € You can use Q6 when operating the BD pop up menu screen, etc. If the signal code of the remote control does not match the signal code of the unit, the remote control code set on the unit is shown on the display. GExampleH If the code setting on the unit is “CAME 1”, and the setting on the remote control is “2”, “PLAYER 1” is shown on the display. NOTE • If you made the remote control settings incorrectly, the remote control signal transmission/status display flashes for 2 seconds, and then goes off. If this happens, the settings are incorrect and retry the settings. € Match the signal code of the remote control with the signal code of the unit. If the remote control code is different, you cannot operate the this unit with the remote control. € Even if you change the remote control code, set the GUI menu “Other Setup”-“Receive Legacy Remocon” (vpage 37) to “Off” when operating this unit with a remote control other than CAME’s. Indd 44 2010/07/05 17:24:25 ENGLISH About media Playable Media Discs Playable Media Playable formats/ modes Playable region codes Symbols Used in this Owner’s Manual Simple version NOTE • A disc may not be accessible or may play incorrectly due to audio and video interruptions, etc. , depending on the recording conditions when recorded with a BD recorder or DVD recorder. USB memory device • The unit supports the FAT16 and FAT 32 file system. It does not support the NTFS file system. [. . . ] (3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept NO LIABILITY for damages of any kind. These conditions apply to any software derived from or based onthe IJG code, not just to the unmodified library. If you use our work, you ought to acknowledge us. Permission is NOT granted for the use of any IJG author’s name or company name in advertising or publicity relating to this software or products derived from it. [. . . ]