User manual CAME MA7571

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. install in accordance with the manufacturer?s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] Bottom : Displayed at the bottom of the screen. Top : Displayed at the top of the screen. See overleaf Specifications Remote control operation buttons Displaying the menu : Cancel the menu : Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu 28 ENGLISH Making detailed settings (Manual Setup) Setting items Setting contents Setting items Quick Select Name Setting contents Default : The changed display names are reset to the defaults. the settings listed below can W , no longer be changed. ?RESTORER ?Dynamic Volume ?MultEQ ?Channel Level ?Dynamic EQ ?Audio Delay Getting Started Connections Settings Playback Remote Control Information Troubleshooting Specifications On-Screen Display Tuner Information : This sets the time the on-screen display is displayed Make the settings related to when a tuner operation is performed. 30sec : Show display for 30 seconds after operation. 10sec : Show display for 10 seconds after operation. IPod Information : This sets the time the on-screen display is displayed when an iPod operation is performed. 30sec : Show display for 30 seconds after operation. 10sec : Show display for 10 seconds after operation. Quick Select Name Rename Label : Change the display name of the selected ?Quick Select? OMP1 (Component video 1 input connector) / COMP2 (Component C video 2 input connector) ? one : Do not assign the component video input connectors to the currently N selected input source. B Upon purchase, the settings of the different input sources are as shown below. input source Default setting DVD COMP1 HDP None TV None SAT/CBL None VCR None DVR COMP2 V. AUX None HDMI1 HDMI2 ? When HDMI is assigned to an input source, the audio signal switches to HDMI along with the video signal. To use with the digital audio input connectors assigned, set menu ?Input Mode?? When the MA7571 and TV are connected with an HDMI cable, if the TV is not compatible with HDMI audio signal playback, only the video signals are output to the monitor. ? The audio signals input from the analog , digital and EXT. IPod Dock The control dock for iPod can be assigned to the DVD SAT/CBL VCR Change the input source to DVR V. Which the control dock for Assign : Assign the currently selected input source to the Control Dock for iPod is assigned. None : Do not assign the currently selected input source to the Control Dock for iPod input. [. . . ] ? The monitor?s input setting is wrong. ? The player is connected using the component input connectors, the monitor is connected using the video (yellow) output connectors. ? The video conversion function does not work for the REC OUT connectors. Most movie software includes copy prevention signals and cannot be copied. [. . . ]