User manual CAME S4339C

[. . . ] Com Register your product for better service: www. Com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www. Com/shop CUSTOMER CARE AND SERVICE We recommend the use of original spare parts. When contacting Service, ensure that you have the following data available. [. . . ] There is also the option of cooking with pots or pans. the grill surface heats to a temperature of 180 °C in approximately 4 minutes. The temperature of the grill surface decreases from 180 °C to 100 °C in approximately 25 minutes, and to 60 °C in approximately 60 minutes. You must always preheat the cooking surface before an operation. 2 The most important features of your appliance • The cooking surface has 2 layers of stainless steel with a layer of aluminium between them. It has a high thermal capacity, which prevents temperatures from quickly decreasing (e. When you prepare meat directly from the refrigerator). € Each Teppan Yaki grill surface is unique because they are made by hand and grounded by grinding specialists. differ1 2 • • • 1 Rear roasting zone 2 Rear roasting zone 3 Front roasting zone 4 Control panel 5 Front roasting zone 5 3 4 ENGLISH 43 3. 3 Control panel layout 1 2 3 4 5 6 7 8 9 13 12 11 10 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Set the Count Down Timer after the selection of the roasting zone. The selection of Timer function is possible for roasting zones that are active and the heat setting is set. € To set the roasting zone: touch again and again until the indicator of a necessary roasting zone comes on. When this function is activated, comes on. 3 The heat setting Touch the control bar at the heat setting. Move your finger along the control bar to change the setting. Do not release before you have a correct heat setting. ENGLISH 45 • To activate the Count Down Timer: touch of the timer to set the time ( 00 - 99 minutes). When the indicator of the roasting zone starts to flash slow, the time counts down. The indicator of roasting zone with the roasting zone starts to flash quickly. € To change the Count Down Timer: set the roasting zone with touch or . [. . . ] 20 mm • Seal the gap between the worktop and glass ceramic with silicone. € Put some soapy water on the silicone. € Pull off the excess silicone with the scraper. 4 The installation of more than one appliance Added parts:connection bar(s), heat resistant silicon, rubber shape, sealing strap. [. . . ]