User manual CAME TAM 432SA

[. . . ] Com Register your product for better service: www. Com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www. Com/shop CUSTOMER CARE AND SERVICE We recommend the use of original spare parts. When contacting Service, ensure that you have the following data available. [. . . ] 10 Excessive temperature alarm An increase in the temperature in the freezer compartment (for example due to a power failure) is indicated by: • flashing temperature • freezer compartment flashing (Freezer compartment indicator ) • red illumination of display • sounding of buzzer • alarm symbol. When normal conditions are restored: • the acoustic signal shuts off • the temperature value continues to flash • the display illumination remains red. When you press Function button / Alarm reset switch to deactivate the alarm, the highest temperature reached in the comfor partment appears on indicator some seconds. At this point the flashing stops and the display illumination changes over from red to white. During the alarm phase, the buzzer can be switched off by pressing Function button / Alarm reset switch. The illumination of the display remains red until normal storage conditions are restored. 1 Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly. Do not use detergents or abrasive powders, as these will damage the finish. The freezing process lasts 24 hours: during this period do not add other food to be frozen. When use the Fast Freeze function: about 6 hours before about 24 hours before not needed not needed Introducing small quantities of fresh food (about 5 kg) Introducing the maximum quantity of food (see rating plate) Introducing frozen food Introducing small quantities of fresh food daily 2 kg maximum 3. 2 Freezing fresh food The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time. Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will damage the surface and leave a strong odour. Clean the condenser (black grill) and the compressor at the back of the appliance with a brush. This operation will improve the performance of the appliance and save electricity consumption. Take care of not to damage the cooling system. Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason it is recommended that the outer casing of this appliance is only cleaned with warm water with a little washing-up liquid added. After cleaning, reconnect the equipment to the mains supply. 1 Periodic cleaning The equipment has to be cleaned regularly: • clean the inside and accessories with lukewarm water and some neutral soap. €¢ regularly check the door seals and wipe clean to ensure they are clean and free from debris. 2 Defrosting of the refrigerator Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, during normal use. The defrost water drains out through a trough into a special container at the back of the appliance, over the motor compressor, where it evaporates. [. . . ] 2 1 4 mm Adjust the appliance in the niche. Make sure that the distance between the appliance and the cupboard front-edge is 44 mm. The lower hinge cover (in the accessories bag) makes sure that the distance between the appliance and the kitchen furniture is correct. Make sure that the clearance between the appliance and the cupboard is 4 mm. [. . . ]