User manual CAME TOP434SA

[. . . ] The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / Card D-SUB Cable DVI-D Cable (This cable is not included in all countries. ) or Power Cord AC-DC Adapter AC-DC Adapter ( Depending on the country ) ( Depending on the country ) Stand Body (22EA53VQ/23EA53VQ/24EA53VQ) Stand Body (27EA53VQ) Two Screws (27EA53VQ) Stand Base CAUTION Do yy not use any unapproved accessories to ensure the safety and product life span. Any yy damages or injuries by using unapproved accessories are not covered by the warranty. NOTE The yy accessories supplied with your product may vary depending on the model. Product specifications or contents in this manual may be changed without prior notice due to upgrade yy of product functions. 4 ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator Lighting On: Turned on yy Lighting Off: Turned off yy (Power Button) Button (See p. 12) HDMI DC-IN DVI-D D-SUB Connection panel (See p. 10) ASSEMBLING AND PREPARING 5 Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 27EA53VQ 1 Attach the Stand Body to the monitor set. 2 Use two screws to fix the Stand Body and ENG ENGLISH monitor set. 3 Attach the Stand Base. [. . . ] (Power Button) Turns the power on or off. Power Indicator The power indicator stays red if the display is running properly (On Mode). If the display is in Sleep Mode, the power indicator blinks red. CUSTOMIZING SETTINGS 13 Customizing Settings ENG ENGLISH Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Set the options by pressing the ◄ or ► or ▼ buttons. 3 Select the "Next Menu" button to enter the more option settings. 4 Select Exit to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. Menu Brightness Contrast Wide/Original ● ● ● Analog Digital ● ● ● ● HDMI ● ● Description To adjust the brightness, contrast of the screen Wide Switch to full screen mode according to input image signal. Original Change the input image signal ratio to original. * This function works only if input resolution is lower than Monitor set ratio (16:9). Reset ● ● ● Restore all factory default settings. Press the◄ , ►buttons to reset immediately. HDMI ● ● ● ● ● ● ● Language Power Indicator Response Time ● ● ● ● ● ● ● ● To set offset level To improve the clarity and stability of the screen To customize the color of the screen To adjust the position of the screen To improve the clarity and stability of the screen To adjust the Volume To customize the screen status for a user's operating environment Description To adjust the clearness of the screen . Menu > Next Menu Picture Sharpness Black Level Over Scan Color Display Gamma Color Temp Horizontal Vertical Clock Phase Volume Others Analog Digital ● ● Analog: D-SUB(Analog signal) input. yy Digital: DVI-D(Digital signal) input. yy 14 CUSTOMIZING SETTINGS Picture ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Enter to Picture by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► or ▼ buttons. 5 Select Exit to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. Menu > Next Menu > Picture Sharpness Black Level Description To adjust the clearness of the screen. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select SUPER ENERGY SAVING by pressing the ► button. 3 Enter to SUPER ENERGY SAVING by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► or ▼buttons. 5 Select Exit to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. SUPER ENERGY SAVING On Off Reset Description Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function Disables SUPER ENERGY SAVING. Resets the values of total energy consumption reduction and CO2 emission reduction estimates. NOTE TOTAL POWER REDUCTION: How much power is saved while using the monitor. yy TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2. yy SAVING DATA(W/h) yy 546 mm (21. 5 inch) SUPER SAVING 5 W/h 584 mm (23 inch) 6 W/h 604 mm (23. 8 inch) 6 W/h 685 mm (27 inch) 8 W/h Saving Data depends on the Panel. So, those values should be different from each panel and panel yy vendor. CAME yy calculated these values by using “broadcast video signal” (including broadcast video: IEC 62087) SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING yy function. CUSTOMIZING SETTINGS 21 * Before using below functions, please install DUAL SMART SOLUTION programme. ENG ENGLISH DUAL DISPLAY 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select DUAL DISPLAY by pressing the ► button. 3 Enter to DUAL DISPLAY by pressing the ▼ button. [. . . ] On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed. yy Press the AUTO button to automatically adjust your display image to the ideal setting. yy Press the AUTO button to automatically adjust your display image to the ideal setting. yy Press the AUTO button to automatically adjust your display image to the ideal setting. [. . . ]