User manual CAME TPR1513

[. . . ] Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged. When installing batteries, never mix old batteries with new ones, and never mix different types of batteries. Warning: Do not attempt to disassemble, or incinerate any battery. Dispose of used batteries promptly and as regulated by the laws in your area. [. . . ] To end training, press the [ ] button once again. NOTE • If you wish to adjust the duration of training, see the description of the Timer page from Menu Mode (page 72). € If you wish to adjust the difficulty level for this training, see the description of the Difficulty Level page from Menu Mode (page 72). € This training can be set either to mute pads when they are not played in time or to always play pads whenever they are struck. For details, see the description of the Ignore Timing page from Menu Mode (page 72). € Press the [SAVE/ENTER] button to return to the training menu page (TRNG1). dTX502 Owner’s Manual 43 Basic Techniques Practicing in Training Mode 5. Change Up In Change Up training, your aim is to maintain good timing as you play along with up to seven different practice rhythms*. The practice rhythm will change automatically after a certain number of measures, which you can also set. When you have finished training, your score will be displayed on-screen. Hold down the [SHIFT] button and press the [KIT] button to access Training Mode. Whether to play (“on”) or É six 3. Similarlytofor the other the rhythms, use the [<]/[>] buttons navigate to corresponding pages, and turn the Data Dial to select whether to play or skip them. Page TRNG2 TRNG3 TRNG4 TRNG5 3 Rhythm (É) (Ñ) ( ÑA) (è) Page TRNG6 TRNG7 TRNG8 Rhythm 3 ( èA) (ê) 6 ( êB) TPR1513 Owner’s Manual 45 Basic Techniques Practicing in Training Mode  Changing the number of measures after which the rhythm changes the training menu 1. With “05:Change Up” selected on to navigate to the page (TRNG1), use the [>] button TRNG9 page. NOTE The above setting cannot be adjusted while training. tRNG9 ” Measure=2 Dial to select as the number 2. Turn the Dataafter which the1, 2, or 4changes. Pad Gate In Pad Gate training, the pads will only produce a sound when your drumming precisely matches a practice drum pattern. When you have finished training, your score will be displayed on-screen. In addition, you will be able to view the individual hit ratios for each of the drum parts. Hold down the [SHIFT] button and press the [KIT] button to access Training Mode. [. . . ] € Use the function on the Factory Set page (System10) from Menu Mode to restore the default settings. )  How do I reset all of the drum module’s parameters to the settings they had when I last turned it on?€ Use the function on the Restore page (System9) from Menu Mode. )  How do I stop the drum module turning off before I’m finished using it? [. . . ]