User manual CAME TRA04

[. . . ] After reading this Owner’s Manual, ensure that it is kept in a safe, convenient location for future reference. Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: CAUTION • Do not place the product in an unstable position where it might accidentally fall over. € If this product is used with a Rack System or Cymbal Stand, make sure all bolts are tightened firmly. [. . . ] Also, when adjusting the height or angle, do not suddenly loosen the bolts. Loose bolts may result in the rack overturning or parts dropping, causing injury. € Please be careful when children are close to or touching the product. Careless movement around the product may result in injury. € When setting the product, please pay close attention to the handling and setting of cables. Carelessly placed cables may cause the user and others to trip and fall. Doing so may result in injury or damage/deterioration to the product. NOTICE • Do not step on or place heavy objects on the product. € Do not use or keep the product in places with extremely high temperature (places in direct sunlight, close to a heater, in a closed car, etc. Package Contents q TRA04 drum pad (x1) w S wing bolt (x1) e Stereo audio cable (×1) r Owner’s Manual (x1; this booklet) q w e Pad r TRA04 Owner’s Manual 5 Setting Up As shown in the figures below, set up your drum pad on an electronic drum rack or a standard tom stand (such as a product from the Yamaha WS series). Take the TRA04 drum pad q and the S wing bolt w from the package and lightly tighten the S wing bolt w (by five or six turns). Slide the drum pad q onto the hexagonal tom holder e from the rack or tom stand, and then tighten the S wing bolt w to secure it in place. CAUTION If the wing bolt and other fasteners are not sufficiently tightened, your drum pad may fall, possibly causing injury. It is important, therefore, that you mount your pad securely on the drum rack or stand. In addition, you should avoid placing your rack or stand on an uneven surface as this may cause it to fall over, again increasing the risk of injury. Q e w Pads & Trigger Input Jacks The functions that the pad can perform will depend on which of your drum module’s trigger input jacks it is connected to. A chart showing the pad functions available with various input jack types can be accessed from the web site shown below. Com/ 6 TRA04 Owner’s Manual Connecting Using the stereo audio cable provided, connect the TRA04 drum pad’s output to a suitable input jack on your DTX drum module. [. . . ] A chart showing the pad functions available with various input jack types can be accessed from the web site shown below. Com/ 6 TRA04 Owner’s Manual Connecting Using the stereo audio cable provided, connect the TRA04 drum pad’s output to a suitable input jack on your DTX drum module. At this time, ensure that the L-shaped end of the cable is plugged into the drum pad’s [OUTPUT] jack. DTX drum module TRA04 Cord clip OUTPUT In order to protect both the cable and the jack from damage, be sure to hook the cable around the cord clip. [. . . ]