User manual CAME ZR23

[. . . ]  If the appliance is levelled correctly, it will be more stable and much less likely to cause vibrations and noise while it is operating, particularly during the spin cycle.  If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washing machine. Connecting the electricity and water supplies Connecting the water inlet hose  Before connecting the inlet hose to the water supply, run the water until it is perfectly clear. Connect the inlet hose to the machine by screwing it onto the cold water inlet of the appliance, which is situated on the top righthand side of the rear part of the appliance (see figure). [. . . ]  Exception: if the “Cotton” programme is selected, the temperature can be increased up to a value of 90°C. Press the button until you have reached the desired delay time. During the setting process, the delay time symbol flashes. Is shown on the display and the After selecting a DELAY TIMER time, the fixed symbol and the cycle duration will appear on the display. Press the button once to display the selected delay time. To remove the DELAY TIMER option, 8 press the button until the display shows the text OFF; symbol will disappear. The Once the START/PAUSE button has been pressed, the time delay may only be decreased. Press the OPTION button to customise the wash cycle in accordance with your own requirements. • Press the button to activate the option; the corresponding indicator light will switch on. • Press the button again to disable the option; the indicator light will switch off.  If the selected option is not compatible with the selected wash cycle, this incompatibility will be signalled by the flashing of the indicator light and a sound alert (3 beeps); the option will not be activated.  Concentrated Detergent To modify the degree of detergent density (refer to the chapter "Auto Dose System").  Fabric softener dosage To dose the amount of fabric softener (refer to the chapter "Auto Dose System"). Extra rinse By selecting this option, the efficiency of the rinse is increased and optimal residual detergent removal is guaranteed. It is particularly useful for skin which is sensitive to detergents. We recommend this option is used with a full load of washing, or when a large amount of detergent is required.  It cannot be used in conjunction with , , . 9 Detergents and laundry EN Detergent The type and quantity of detergent required depend on the type of fabric you are washing (cotton, wool, silk, etc. ), as well as its colour, the washing temperature, the level of soiling and the hardness of the water in the area. Whenever the detergent and fabric softener “Auto Dose System” is activated, this washing machine helps to prevent wastage and to protect the environment, besides guaranteeing optimal washing performance. We recommend the following: • Use powder detergent for carrying out a pre-wash and pour in the "traditional" mode. • Use liquid detergents for delicate cotton garments and for all low-temperature wash cycles. [. . . ] If the problem persists, contact the Technical Assistance Service. • The detergent is not suitable for machine washing (it should display the text “for washing machines” or “hand and machine wash”, or the like). The icons corresponding to the “Phase in progress” flash rapidly at the same time as the ON/OFF indicator light. Fabric softener has been added instead of detergent or vice-versa) • Two different types of detergent/fabric softener have mixed. [. . . ]