User manual CANDY C 431

[. . . ] Keep packing materials such as plastic bags, polystyrene, or nails out of the reach of children because they are dangerous for children. The company shall not be liable if the instructions provided in this document are not complied with. The parts of this appliance that may come into contact with foodstuffs comply with the provisions of EEC Directive 89/109. This appliances complies with Directives 89/336/EEC, 73/23/EEC and following changes. [. . . ] : All catalytic linings currently on the market have a working life of about 300 hours. They should therefore be replaced after about 300 hours. You check that the oven is properly plugged into the power supply. If the cause of the fault cannot be detected: disconnect the oven from the mains, do not touch the oven and call the after sales service. Before calling the Service Centre remember to make a note of the serial number on the serial number specifications plate. The oven is supplied with a guarantee certificate that ensures that it will be repaired free of charge by the Service Centre whilst under guarantee. This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The symbol on the product indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. When the oven is on standby - only the time of day appears on the display. 1- Select the type of dish you want to cook by turning the function selector knob to the appropriate position. 3- According to the recipe selected , the following will be displayed: · The heating elements in operation for the particular programme, as well as the suggested shelf position for the food to be cooked. The weight of the food to be cooked or the number of servings/ portions (variable setting, flashing display), can be chosen by turning the central button. The display indicating the weight of the food or the number of servings becomes static. The oven begins cooking in Automatic mode (the Auto sign switch on the display) and the oven starts to heat up. The indicator light flashes until the selected temperature has been reached. An audible signal sounds at the end of this operation and the indicator becomes stable. The cooking time indicator light and the End of cooking time indicator light appear on the display. These settings can be adjusted by turning the programme selector knob to "cooking time" or "end of cooking". the "cooking time" or "end of cooking" display will start flashing. [. . . ] Turn the programme selector knob back to the STOP position to confirm the new cooking time. When the time is up, the cooking time will disappear from the display. An audible signal will sound for 15 seconds and the Cooking time and STOP symbols will flash. Turn the programme selector knob back to STOP. [. . . ]