User manual CANDY CBD 1163

[. . . ] The appliance is supplied with a guarantee certificate which allows free use of the Technical Assistance Service. Contact a qualified electrician if this is not the case. This appliance complies with Directives 89/336/EEC, 73/23/EEC and following changes. Do not touch the appliance with wet or damp hands or feet. [. . . ] When you are ready to unload, press the Crease Guard button ­ this will drain and spin ready for emptying If you do not want to spin the clothes and activate drain only: - release the START button - turn the selector knob to the OFF position - select programme drain - wait around 5 seconds - switch on the appliance again by pressing the START button EN SUPER RINSE BUTTON Thanks to the new electronic system, acting on the button is possible to effect a new special rinse cycle. The addition of a lot of more water and the new action combined of cycles of rotation of the drum with load and unloading of water, allow to get laundry perfectly rinsed. This function has been studied for the people with delicate and sensitive skin, for which also a least residue of detergent can cause irritations or allergies. It advises to also use this function for the children items and in case of washings of very dirty items, for which it is due to use a lot of detergent, or in the washing of towelling items whose fibers mostly have the tendency to hold the detergent. This button is not available in the Wool programmes. INTENSIVE WASH BUTTON This function which is available on all cotton programmes is very useful for heavy soiling. The temperature is kept constant throughout all the wash phases and the programme is extended to ensure an extra deep cleaning performance. This operation must be done before pressing the START button When setting very short delay times (1 or 2 hours) it is advisable to turn the knob to the last position (12 h) and then move it back to the required times. During the "Delay start" period, the indicators of the wash phase flash In case of power failure, the delay start function re-starts with the delay time at the same value just before the power failure. In the case where we wish to cancel the delay start, rotate the Delay Start knob to the " " position then press START. SPIN SPEED CONTROL ROTATES IN BOTH DIRECTIONS The spin cycle is very important to remove as much water as possible from the laundry without damaging the fabrics. You can adjust the spin speed of the machine to suit your needs. By adjusting the control, it is possible to reduce the maximum speed, and if you wish, the spin cycle can be cancelled altogetherposition . The programme carries out with the programme selector stationary on the selected programme till cycle ends. Switch off the washing machine by pressing the START button and turning the selector to OFF. The detergent drawer is divided into 4 compartments: - The first I for the prewash detergent - The second II for the main wash detergent. A special container is supplied for use with liquid detergent. This can be placed inside the draw as shown in fig. For the various types of fabrics and various degrees of dirt the washing machine has 4 different programme bands according to: wash cycle, temperature and lenght of cycle (see table of washing cycle programmes). 1 Resistants Fabrics The programmes have been designed for a maximum wash and the rinses, with spin intervals, ensure perfect rinsing. 2 Mixed and Synthetic Fabrics The main wash and the rinse gives best results thanks to the rotation rhythms of the drum and to the water levels. A gentle spin will mean that the fabrics become less creased. [. . . ] This does not compromise the efficiency of the rinses. - The presence of white powder (zeolites) on the washing at the end of the washing cycle. This does not remain incorporated in the fabric and does not alter the colour. - The presence of foam in the last rinse water which is not necessarily a sign of inadequate rinsing. [. . . ]