User manual CANDY CDIMN 4D622SB

[. . . ] We are proud to offer the ideal product for you and the best complete range of home appliances for your daily routine. Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance. Only use the dish washer after carefully reading these instructions. We recommend you always keep this manual to hand and in good condition for any future owner. [. . . ] Pressing the "OPTIONS" and "TABS" buttons you can select the preferred language. To accept the language selection press the "START/RESET" button Immediately afterwards the "WELCOME" message will scroll on the display once and the indicator lights will all be off. "ECO" will appear on the display. Press "START/RESET" and a signal will sound, the indicator light corresponding to the selected programme will stay on and the wash indicator light will come on. Hold down the ON/OFF button for about 3 Secs to turn the machine on and the "ECO" programme or the programme you have decided to use will appear on the display, saving it when the dishwasher is switched on. (To save the programme, see the specific paragraph "Memorising the last programme used"). settings Menu The dishwasher is regulated with certain factory settings. Nevertheless, from the Settings menu, you can adjust various parameters to suit your washing requirements. entering the Settings menu The dishwasher must ALWAYS be off before you start this procedure. Turn on the dishwasher by holding the "ON/OFF" button down for about 3 secs. Hold down the "PROGRAMME SELECTION" and "ON/OFF" buttons for about 5 secs. The message "SETTINGS" will appear on the display and the indicator lights of the "OPTIONS" and "TABS" buttons will be on. Pressing the "PROGRAMME SELECTION" button you can select the parameters to be adjusted in succession (SOFTENER BUZZER MEMO FUNCTION). To adjust the SOFTENER see the specific Chapter of the manual. To adjust the BUZZER see the specific paragraph. To adjust the MEMO FUNCTION see the specific paragraph. changing language Press the "DELAY START" and "TABS" buttons together for 3 seconds. "ENGLISH" appears on the display. Pressing the "TABS" and "OPTIONS" buttons you can select the preferred language. To accept the language selection press the "START/RESET" button. "AUTOMATIC" programmes Models with Smart Loading Sensor The "AUTO WASH" programme, thanks to an algorithm that analyses the degree of dirtiness of the dishes in real time, automatically sets the ideal temperature and washing time , optimising water and electricity consumption Models with dirt sensor (Only on some models). The dishwasher is equipped with a dirt sensor, capable of analysing water murkiness during all "AUTOMATIC" programme phases (see programme legend). [. . . ] After checking to make sure the water supply is open, that the drain pipe is not bent and that the siphon or filters are not clogged, set the selected program again. If the fault persists, contact the Technical Assistance Centre. This dishwasher is equipped with an overflow safety device that, in the event of a problem, automatically discharges any excess water. To ensure the correct operation of the overflow safety device, we recommend not moving or tilting the dishwasher during operation. [. . . ]