User manual CANDY CFFO3550E/N

[. . . ] Before using your refrigerator, please carefully read this instruction manual in order to maximize its performance. Store all documentation for subsequent use or for other owners. This product is intended solely for household use or similar applications such as: - the kitchen area for personnel in shops, offi ces and other working environments - on farms, by clientele of hotels, motels and other environments of a residential type - at bed and breakfasts (B & B) - for catering services and similar applications not for retail sale. This appliance must be used only for purposes of storage of food, any other use is considered dangerous and the manufacturer will not be responsible for any omissions. [. . . ] appliance start-up Remove all wrapping/packaging present inside the appliance and clean with water and baking soda or neutral soap. After the installation, wait 2 - 3 hours to allow time for the refrigerator/ freezer to stabilize at normal working temperature, before placing fresh or frozen foods inside. If the power cord becomes disconnected, wait at least five minutes before restarting the refrigerator/ freezer. At this point, the appliance is ready for use. The temperature adjustment of both compartments is effected by rotating the thermostat knob (Fig. For colder temperature in the freezer, by turning towards 5. For temperature less cold in the refrigerator and in the freezer, by rotating in the direction of OFF. Conditions Summer or ambient temperature between 25-35 °C Spring, autumn or ambient temperature between 15-25 °C Winter, or ambient temperature between 5-15 °C After shipping, place the appliance vertically and wait at least 2 - 3 hours before connecting it to the electrical system. Before inserting the plug into the electrical socket, make sure that: For better energy savings, we suggest: · Installing the appliance away from heat sources and not exposed to direct sunlight and in a well ventilated room. Avoid putting hot food into the refrigerator to avoid increasing the internal temperature and therefore causing continuous functioning of the compressor. Do not excessively stuff foods so as to ensure proper air circulation. Defrost the appliance in case there is ice (see DEFROSTING) to facilitate the transfer of cold. Ln case of absence of electrical energy, it is advisable to keep the refrigerator door closed. Open or keep the doors of the appliance open as little as possible · Avoid adjusting the thermostat to temperatures too cold. Remove dust present on the rear of the appliance (see CLEANING). aVOIDING NOISES During its operation, the refrigerator emits some absolutely normal noises, such as: · RUMBLINGS, RUSTLINGS and HISSING, the refrigerant is flowing through the tubes. TICKS and CLICKS, the operation shutdown of the compressor. Small measures to r ed uce the vibration nois es: · Containers touch each other: Avoid contact between containers and glass recipients. NOTE: The refrigerant gas produces noise even when the compressor is off; it is not a defect, it is normal. If you hear a clicking sound inside the appliance, it is normal as due to expansion of the various materials. Before each operation, remove the refrigerator plug from the power socket to prevent electric shocks. Do not pour water directly on the outside or inside of the refrigerator itself. [. . . ] Reassemble the doors and hinges workings from bottom to top, from 1-2. Insert the appliance into the column, placing it on the opposite site of the hinges, and make sure 3-5 mm distance gap. After ensuring the match between appliance door and column door, then screw the appliance upper part to the cabinet Screw the appliance lower part. Fit the seal to the appliance, cut off the excessive part if necessary. [. . . ]