User manual CANDY CSE H9A1LE-47

[. . . ] We are proud to offer the ideal product for you and the best complete range of home appliances for your daily routine. Please read and follow these instructions carefully and operate the machine accordingly. This booklet provides important guidelines for safe use, installation, maintenance and some useful advice for best results when using your machine. Keep all documentation in a safe place for future reference or for any future owners. [. . . ] Made of polyester or polyamid, as well as for cotton/synthetic mixes. Only put into the tumble dryer laundry which has been thoroughly wrung or spin-dried. The drier the laundry the shorter the drying time thus saving electricity. Do not overload the drum, large items when wet exceed the maximum admissible clothes load (for example: sleeping bags, duvets). L Clean the filters after every drying cycle. L In models equipped with a water collection tray, the tray should be emptied after every drying cycle. L Wipe the outside of the machine and the door with a soft cloth. l DO NOT use abrasive pads or cleaning agents. L To prevent the door sticking or the buildup of fluff clean the inner door and gasket with a damp cloth after every drying cycle. The drum, door and load may be very hot. wARNING Always switch off and remove the plug from the electricity supply before cleaning this appliance. wARNING For electrical data refer to the rating label on the front of the dryer cabinet (with the door open). Open the door and load the drum with laundry. Ensure that garments do not hinder closure of the door. Gently close the door pushing it slowly Until you hear the door 'click' shut. When the cycle is nearing completion the machine will enter the cool down phase, the clothes will be tumbled in cool air allowing the load to cool down. Following the completion of the cycle the drum will rotate intermittently to minimize creasing. This will continue until the machine is switched OFF or the door is opened. Do not open the door during the automatic programmes in order to obtain a proper drying. technical data Power input / Power current fuse amp/ Supply voltage: see rating plate. Don't touch the buttons while inserting the plug because the machines calibrates the systems during the first seconds: touching the buttons, the machine couldn't work property. In this case, remove the plug and repeat the operation. [. . . ] Drying time is too long/clothes are not dry enough. L Have you selected the correct drying time/programme? were the clothes thoroughly wrung or spindried?L Does the heat exchanger need cleaning? [. . . ]