User manual CANDY CVFTS G674TMH-01

[. . . ] L Le produit est conçu pour être utilisé dans un foyer domestique, comme: - Le coin cuisine dans des magasins ou des lieux de travail, - Employés et clients dans un hôtel, un motel ou résidence de ce type, - Dans des bed and breakfast, - Service de stock ou similaire, mais pas pour de la vente au détail. Pour les lavages entre 40°C et 60°C, le type de détergent utilisé doit être adapté au type de tissu et au degré de salissure. We are confident it will loyally assist you in safely washing your clothes, even delicates, day after day. Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance. [. . . ] L To reactivate the spin cycle press the button until you reach the spin speed you would like to set. L It is possible to modify the spin speed without pausing the machine. L Pressing simultaneously the buttons TEMPERATURE SELECTION and SPIN SPEED for about 3 seconds, the machine allows you to lock the keys. In this way, you can avoid making accidental or unwanted changes if a button on the display is pressed accidently during a cycle. L The key lock can be simply cancelled by pressing the two buttons simultaneously again or turning off the appliance. The display's indicator system allows you to be constantly informed about the status of the machine. 1) DOOR LOCKED INDICATOR LIGHT l The indicator light is illuminated when the door is fully closed. Close the door BEFORE selecting the START/PAUSE button. L When START/PAUSE is pressed on the machine with the door closed, the indicator will flash momentarily and then illuminate. If the door is not properly closed, the light will continue to flash for about 7 seconds, after which the start command will be automatically delete. In this case, close the door in the proper way and press the START/PAUSE button. L Wait until the DOOR LOCKED light has gone out before opening the door. If you want carry out a cold wash all the indicators must be off. 4) CYCLE DURATION l When a programme is selected the Display automatically shows the cycle duration, which can vary, depending on the options selected. L Once the programme has started you will be kept informed constantly of the time remaining to the end of the wash. L The appliance calculates the time to the end of the selected programme based upon a standard loading, during the cycle, the appliance corrects the time to that applicable to the size and composition of the load. 5) STAIN LEVEL INDICATORS LIGHTS l Once the programme has been selected , The indicator light will automatically show the stain level set for that programme. L Selecting a different stain level the relevant indicator will light up. 6) OPTIONS INDICATOR LIGHTS The indicator lights show the option that can be selected by the relevant button. 7) KEY LOCK INDICATOR LIGHT The indicator light show that the keys are locked. This show the spin speed of the selected programme that can be changed or omitted by the relevant button. L In the models with the Wi-Fi option, the icon indicates that the Wi-Fi system is working. [. . . ] Some models include a "no spin" function: make sure it is not selected. Check which options are selected and their effect on the spin cycle. Excessive detergent can impede the spin cycle, ensure the correct amount of detergent is being used. The washing machine may not be fully levelled: if necessary, adjust the feet as indicated in the specific section. [. . . ]