User manual CANDY FCPK626XLA

[. . . ] WARNING: the appliance and accessible parts become hot during use. WARNING: the accessible parts can become hot when the grill is in use. Children should be kept at a safe distance. WARNING: ensure that the appliance is switched off before replacing the bulb, to avoid the possibility of electric shocks. [. . . ] Individuals can play an important role in ensuring that the WEEE do not become an environmental problem; it is essential to follow a few basic rules: - the WEEE should not be treated as domestic waste; - the WEEE should be taken to dedicated collection areas managed by the town council or a registered company. In many countries, domestic collections may be available for large WEEEs. When you buy a new appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as long as the appliance is of an equivalent type and has the same functions as the purchased appliance. SAVING AND RESPECTING THE ENVIRONMENT Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently as possible, because heat from the cavity disperses every time it is opened. For a significant energy saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and use the residual heat that the oven continues to generate. Keep the seals clean and in order, to avoid any heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed cooking" programme makes energy saving more simple, moving the cooking process to start at the reduced tariff time slot. The parts of this appliance that may come into contact with foodstuffs comply with the provisions of EEC Directive 89/109. By placing the mark on this product, we are confirming compliance to all relevant European safety, health and environmental requirements which are applicable in legislation for this product. Collects the residues that drip during the cooking of foods on the grills. PRELIMINARY CLEANING Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering smells of newness. Use of the Oven The first operation to carry out after installation, or after a power cut, is to set the time of day (a power cut has occured if the display is flashing 12:00). 200°-> The temperature LED "°" flashes until the displayed temperature is reached. HOT -> When a programme finishes, if the oven is still hot, the display shows "HOT", alternating with the time, even if the knobs are positioned to OFF. Rotate the left function selector to the position " Silence mode " Rotate the function selector to the position OFF. Enables you to turn off the sound of the minute minder. To turn off the sound of the minute minder Rotate the left function selector to the position "Set the time". Use the buttons " + " or " - " to set the time Rotate the function selector to the position OFF. [. . . ] Pour 300 ml of water into the Aquactiva container at the bottom of the oven. Set the temperature to the Aquactiva icon 4. Allow the program to operate for 30 minutes. After 30 minutes switch off the program and allow the oven to cool down. [. . . ]