User manual CANDY FCXNE888X

[. . . ] During cooking, moisture may condense inside them according the instructions. The oven cavity or on the glass of the door. this is · Only use the meat probe recommended for this To reduce this effect, wait 10- oven. 15 minutes after turning on the power before · Do not use a steam cleaner for cleaning Putting food inside the oven. [. . . ] Wash all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering smells of newness. Use of the Oven (According to model) The oven is switched on and off with this button. If the oven is switched off, the display shows the clock. When the oven is inactive, all the functions are available except the cooking duration and end of cooking. If the clock is not set, the oven does not work: the display flashes, showing "12:00" and the only functioning key is Extra. You can select a time between 00:00 and 23:59. The timer functions regardless of whether the oven is switched on. Switched on for the first time, the display illuminates and shows "12:00". To modify the time, press EXTRA enough times to illuminate the icon and use the "<" and ">" keys to set the time, confirming it by pressing "OK". It allows you to set the time that · The alarm functions regardless of whether Press the EXTRA key enough times to illuminate the icon and then either the "<" or ">" key to activate this function: the display will show ON; to confirm press "OK". Press the EXTRA key enough times to illuminate the icon and then either the "<" or ">" key to deactivate this function: the display will show OFF; to confirm press "OK". If the function is active only the "Extra" button, to deactivate the function, and "On/Off" button can be used. This function is useful when there are children in the house. Pressing "Extra" on the timer display allows you to select the Wi-Fi menu. In the Wi-Fi menu if you press the "< >" - Off: Wi-Fi is off; the oven is not controllable via the app. - On: Wi-fi is on and the oven is only controllable via the app. It means that it is not possible to select cooking functions, recipes and temperature from the display. You can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it can Only be switched on via the app. - Reset: This setting should be used to enrol the oven the first time it connects to your Wi-Fi network and to reset the current Wi-Fi connection to allow a new Once selected, the appliance gives you 5 minutes to complete the enrolment process. During this process the cooking functions, recipes and Temperature setting are not accessible from the display. only the Wi-Fi menu is available by pressing "Extra". [. . . ] 1- Rotate the function selector to the position " The preset time is 90 min, this can Be varied from 90 min (Eco mode) to 120 min (Sup mode) via the If the oven is very dirty, it is Recommend o increase the time to 120 min, if the oven is moderately dirty Reduce the cleaning cycle time to 90 min. 2- It is possible to defer the start time of the pyroclean cycle by changing the END time via the programmer. 3- After few minutes, when the oven reaches a high temperature, the door The pyroclean cycle can be stopped at any time by Turning the function selector back to '0' (the word OFF will be displayed for 4- Once the pyroclean cycle is finished, the pyrolysis will switch off On the display appears the indication "END" until the door is 5- You can turn the function selector back to " 0 " but if the temperaure is Still high, the "0--n " indication appears to inform that the door is locked. Use of the pyrolytic cycle in Touch Control ovens: 1- Rotate the function selector into position pyrolisys. [. . . ]