User manual CANDY FCXP876XP

[. . . ] € Via Privata Eden Fumagalli • 20047 Brugherio Milano Italy Safety Indications • WARNING: the appliance and accessible parts become hot during use. €WARNING: the accessible parts can become hot when the oven is in use. Children must be kept at a safe distance. €WARNING: ensure that the appliance is switched off before replacing the bulb, to avoid the possibility of electric shocks. [. . . ] For a significant energy saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and use the residual heat that the oven continues to generate. Keep the seals clean and in order, to avoid any heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed cooking" programme makes energy saving more simple, moving the cooking process to start at the reduced tariff time slot. 6 Declaration of compliance The parts of this appliance that may come into contact with foodstuffs comply with the provisions of EEC Directive 89/109. By placing the mark on this product, we are confirming compliance to all relevant European safety, health and environmental requirements which are applicable in legislation for this product. Collects the residues that drip during the cooking of foods on the grills. 3 First Use PRELIMINARY CLEANING Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering smells of newness. The first operation to carry out after installation, or after a power cut, is to set the time of day (a power cut has occured if the display is flashing 12:00). 200°-> The temperature LED “°” flashes until the displayed temperature is reached. HOT -> When a programme finishes, if the oven is still hot, the display shows "HOT", alternating with the time, even if the knobs are positioned to OFF. EN 08 FUNCTION SILENCE MODE HOW TO ACTIVATE • Rotate the left function selector to the position " Silence mode “ • Rotate the left function selector to the position “Set the time”. € Use the buttons " + " or " - " to set the time • Turn the right function selector to a cooking function • Rotate the left function selector to the position "Cooking Time Duration” • Set the time of cooking by using buttons " + " and "-" • Lighting Auto appears • Turn the right function selector to a cooking function • Rotate the left function selector to the position "End of cooking" • Set the end time of cooking by using buttons " + " and " - " • Lighting Auto appears HOW TO DEACTIVATE • Rotate the function selector to the position OFF. € Rotate the function selector to the position OFF. WHAT IT DOES • Enables you to turn off the sound of the minute minder. € Set the time of cooking by using buttons “+”and “-” • Turn the left function selector to the position Child lock. € Press the button " + " during 5 seconds • Child lock is available when " STOP " appears on display • Set the time on 00. 00 by turning the left function selector to the position Minute Minder, and using the button " - “ • Turn back the left function selector to Child lock and press button " + " during 5 seconds. € This function is useful when there are children in the house. DEFROST: When the dial is set to this position. [. . . ] Before executing a pyrolytic cycle: •Remove all the accessories from the oven because they are not able to tolerate the high temperatures used during the pyrolytic cleaning cycle ; in particular removing grids, side racks and the telescopic guides (refer to the chapter REMOVING GRIDS AND SIDE RACKS) . In ovens with meat probe it is necessary, before making the cleaning cycle , close the hole with the nut provided. €Remove any large spillages or stains as it would take too long to destroy them. Also excessively large amounts of grease could ignite when subject to the very high temperatures of the Pyrolytic cycle. [. . . ]