User manual CANDY GC1291D2

[. . . ] OUR COMPLIMENTS With the purchase of this Candy household appliance, you have shown that you will not accept compromises: you want only the best. Candy is happy to present their new washing machine, the result of years of research and market experience through direct contact with Consumers. You have chosen the quality, durability and high performance that this washing machine offers. Candy is also able to offer a vast range of other household appliances: washing machines, dishwashers, washer-dryers, cookers, microwave ovens. [. . . ] Proceed as follow to set a delayed start: Select a programme (Wait that a “Spin” indicator light will go on). Press Start Delay button (each time the button is pressed the start will be delayed by 3, 6 or 9 hours respectively and the corresponding light will blink). Press START to commence the Start Delay operation (the indicator light associated with the selected Start Delay time stops blinking and remains ON). At the end of the required time delay the programme will start. To cancel the Start Delay function : press the Start Delay button until the indicator lights will be off. EN SPIN SPEED BUTTON The spin cycle is very important to remove as much water as possible from the laundry without damaging the fabrics. You can adjust the spin speed of the machine to suit your needs. By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle can be cancelled (the spin speed indicator light are off). To reactivate the spin cycle is enough to press the button until you reach the spin speed you would like to set. For not damage the fabrics, it is not possible to increase the speed over that automatically suitable during the selection of the program. It is possible to modify the spin speed in any moment, also without to pause the machine. SPIN SPEED INDICATOR LIGHT When you set a program, the maximum possible spin speed will be automatically shown by the relevant indicator light. Choosing a smaller spin speed by the appropriate button, the relevant indicator light will go on. PROGRAMME START LIGHT This lights up when the START button has been pressed. EN BUTTONS INDICATOR LIGHT These light up when the relevant buttons are pressed. If an option is selected that is not compatible with the selected programme then the light on the button first flashes and then goes off. Press the "Start/Pause" button to start the selected cycle. schakel de machine bij het einde van het programma uit door de knop in de “OFF” positie te draaien. Switch off the washing machine by turning the selector to OFF. °C CHARGE DETERGENT 2 9 90° ● ● 1 ● Resistant fabrics Cotton, linen Cotton, mixed Whites with Prewash 6 7 Fast coloureds ** ** 6 7 9 60° ● ● Fast coloureds 6 7 9 40° ● ● ● ● Non fast coloureds Mixed fabrics and synthetics Synthetics (nylon, perlon), mixed cotton Mixed, delicate synthetics 6 3 3 3 7 9 30° 50° 40° 30° Fast coloureds Non fast coloureds 3, 5 4, 5 3, 5 4, 5 3, 5 4, 5 ● ● ● ● Please read these notes * Maximum load capacity of dry clothes, according to the model used (see rating plate). ** STANDARD COTTON PROGRAMMES ACCORDING TO (EU) No 1015/2010 and No 1061/2010 COTTON PROGRAMME with a temperature of 60°C COTTON PROGRAMME with a temperature of 40°C These programmes are suitable to clean normally soiled cotton laundry and they are the most efficient programmes in terms of combined energy and water consumptions for washing cotton laundry. These programmes have been developed to be compliant with the temperature on the wash label on the garments and the actual water temperature may slightly differ from the declared temperature of the cycle. [. . . ] The appliance must be switched off and unplugged. Detach the drainage hose from the clamp and lower it over the bowl until all the water is removed. Repeat the same operation with the water inlet hose. Does not load water See cause 1 Inlet tap turned off Timer not set correctly 3. [. . . ]