User manual CANDY GO 167DF/L1

[. . . ] OUR COMPLIMENTS With the purchase of this Candy household appliance, you have shown that you will not accept compromises: you want only the best. Candy is happy to present their new washing machine, the result of years of research and market experience through direct contact with Consumers. You have chosen the quality, durability and high performance that this washing machine offers. Candy is also able to offer a vast range of other household appliances: washing machines, dishwashers, washer-dryers, cookers, microwave ovens. [. . . ] At this stage it is possible to start the programme previously selected by pressing the “START/PAUSE” button or to cancel the process by setting the selector to the OFF position and then selecting another programme. EN SPIN SPEED BUTTON The spin cycle is very important to remove as much water as possible from the laundry without damaging the fabrics. You can adjust the spin speed of the machine to suit your needs. By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle can be cancelled. To reactivate the spin cycle is enough to press the button until you reach the spin speed you would like to set. For not damage the fabrics, it is not possible to increase the speed over that automatically suitable during the selection of the program. It is possible to modify the spin speed in any moment, also without to pause the machine. DE ES DISPLAY DIGITAL El sistema de aviso del display permite estar constantemente informado del funcionamento del aparato: EN “DIGITAL” DISPLAY The display’s indicator system allows you to be constantly informed about the status of the machine: H 1 3 2 4 h mm DISPLAY “DIGIT” Die Anzeigen im Display geben Ihnen ständig Auskunft über die gerade durchgeführten Funktionen des Gerätes. Pressing the spin button will reduce the speed by 100 rpm each time the button is pressed. The minimum speed allowed is 400 rpm, or it is possible to omit the spin by pressing the spin button repeatedly. 3) PROGRAMME START LIGHT This lights up when the START button has been pressed. 4) CYCLE DURATION When a programme is selected the display automatically shows the cycle duration, which can vary, depending on the options selected. Once the programme has started you will be kept informed constantly of the time remaining to the end of the wash. The appliance calculates the time to the end of the selected programme based upon a standard loading, during the cycle, the appliance corrects the time to that applicable to the size and composition of the load. EN BUTTONS INDICATOR LIGHT These light up when the relevant buttons are pressed. If an option is selected that is not compatible with the selected programme then the light on the button first flashes and then goes off. Switch off the washing machine by turning the selector to OFF. °C CHARGE DETERGENT 2 Resistant fabrics Cotton, linen Cotton, mixed resistant Cotton, mixed Whites Whites with Prewash Fast coloureds Fast coloureds Non fast coloureds Mixed fabrics and synthetics Synthetics (nylon, perlon), mixed cotton Mixed, delicate synthetics 1 q q q q q q 6 6 7 7 7 7 7 9 9 9 9 9 90° 60° 60° 40° 30° q q q q q ** ** 6 6 6 Fast coloureds Non fast coloureds 3 3 3 3, 5 4, 5 3, 5 4, 5 3, 5 4, 5 50° 40° 30° q q q q q q Please read these notes * Maximum load capacity of dry clothes, according to the model used (see rating plate). When washing heavily soiled laundry it is recommended the load is reduced to 3/4 kg maximum. It can be used for rinsing any type of fabric, eg. This program can be also used as cycle of Bleaching (see table of washing cycle programmes). SPECIAL “FAST SPIN” PROGRAMME Programme “FAST SPIN” carries out a maximum spin (which can be reduced by using the correct button). [. . . ] REMOVALS OR LONG PERIODS WHEN THE MACHINE IS LEFT STANDING For eventual removals or when the machine is left standing for long periods in unheated rooms, the drain hose should be emptied of all remaining water. The appliance must be switched off and unplugged. Detach the drainage hose from the clamp and lower it over the bowl until all the water is removed. Repeat the same operation with the water inlet hose. [. . . ]