User manual CANDY GO 4 1064 D

[. . . ] With the purchase of this Candy household appliance, you have shown that you will not accept compromises: you want only the best. Candy is happy to present their new washing machine, the result of years of research and market experience through direct contact with Consumers. You have chosen the quality, durability and high performance that this washing machine offers. Candy is also able to offer a vast range of other household appliances: washing machines, dishwashers, washer-dryers, cookers, microwave ovens. [. . . ] By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle can be cancelled. To reactivate the spin cycle is enough to press the button until you reach the spin speed you would like to set. For not damage the fabrics, it is not possible to increase the speed over that automatically suitable during the selection of the program. It is possible to modify the spin speed in any moment, also without to pause the machine. NOTE: The machine is fitted with a special electronic device, which prevents the spin cycle should the load be unbalanced. This reduces the noise and vibration in the machine and so prolongs the life of your machine. DIGITAL DISPLAY The display's indicator system allows you to be constantly informed about the status of the machine: 1) WASH TEMPERATURE When a program is selected the relevant indicator will light up to show the maximum possible wash temperature. Selecting a lower temperature using the special button will cause the corresponding indicator to light up. NOTE: The temperature must be adjusted before selecting DEGREE OF SOILING. 2) DOOR LIGHT Once the "START/PAUSE" button has been pressed the light first flashes then stops flashing and remains on until the end of the wash. 2 minutes after the end of the wash the light goes off to show that the door can now be opened. 3) SPIN SPEED Once the program has been selected , the maximum spin speed allowed for that program appears on the display. Pressing the spin button will reduce the speed by 100 rpm each time the button is pressed. 5) CYCLE DURATION When a program is selected the display automatically shows the cycle duration, which can vary, depending on the options selected. Once the program has started you will be kept informed constantly of the time remaining to the end of the wash. 6) PROGRAMME START LIGHT This lights up when the "START/PAUSE" button has been pressed. 7) DEGREE OF SOILING When a program is selected the relevant indicator will light up to show the minimum possible degree of soiling. Selecting a greater degree of soiling using the special button will cause the corresponding indicator to light up. nOTE: The degree of soiling can vary automatically , depending on the temperature selected. "DEGREE OF SOILING" BUTTON By selecting this button (active only on COTTON and MIXED FIBRES programs) there is a choice of 3 levels of wash intensity, depending on how much the fabrics are soiled. Once the program and wash temperature have been selected the degree of soiling indicator is automatically set to the minimum allowed; pressing the button increases the level and the settings for the cycle duration are also adjusted accordingly. PROGRAM SELECTOR WITH OFF POSITION When the program selector is turned the display lights up to show the settings for the program selected. [. . . ] Detach the drainage hose from the clamp and lower it over the bowl until all the water is removed. Repeat the same operation with the water inlet hose. Does not function on any program Insert plug Turn on mains switch Check Check Close load door Check Turn on water inlet tap Set timer on correct position Straighten discharge tube Check filter Replace washer and tighten the tube on the tap Wait a few minutes until the machine discharges water Turn the program dial onto spin setting Adjust special feet Remove transport bracket Distribute the washing evenly Call service. Mains plug not plugged in Mains switch not on No power Electric circuit fuses failure Load door open 2. [. . . ]