User manual CANON COLOR IMAGERUNNER C1022I CANON GREEN TIPS FLYER

[. . . ] Do not set it vertically or upside-down. 3 Remove the shipping materials. Drum Cartridge Machine 4 Remove the protective cover. IMPORTANT 5 Position the triangular mark on the drum cartridge with the triangular mark on the machine and install the drum cartridge. Do not open the protective shutter or touch the sensors, electrical contacts, cartridge memory or imaging transfer belt on the drum cartridge. Protective shutter Electrical contacts Electrical contacts Sensors 6 Pull down the handle to set the cartridge in place. Drum cartridge memory Imaging transfer belt -5- Install the toner cartridges. 6 Press or (arrow keys) to select <5. ALL COLORS> on the LCD press [Set]. NOTE 1 Close the cartridge cover and lower the scanning platform. Please wait until the whirring sound stops. If you replace an individual color, select either YELLOW, CYAN, MAGENTA or BLACK instead of ALL COLORS and press [Set]. If you select <5. ALL COLORS>, change the cartridge one by one instead of removing all cartridges. NOTE The machine uses a compact carousel configuration for the toner. This means the carousel rotates into a new position for each toner to be loaded. 2 The LCD alternates between the standby display and the message to insert toner cartridges (Y/M/C/K). [. . . ] Make sure the stack height does not exceed the limit mark. -9- Set the basic fax settings. IMPORTANT Before sending a fax, you MUST register the current date and time, fax number, and unit name in the machine. NOTE For details on setting up the machine for the fax function, see the Facsimile Guide. For details on how to input characters, see Chapter 2, "Registering Information in Your Machine, " in the Facsimile Guide. Set key Menu Menu key GHI Setting the Basic Fax Settings: ABC DEF 1 JKL 2 MNO 3 6 WXYZ Arrow keys PQRS 4 TUV 5 8 SYMBOLS 1 Press [Menu] or (arrow keys) to select <4. FAX SETTINGS> press [Set]. Set Stop/Reset 7 TONE 9 0 Stop/Reset key Numeric keypad 2 Press or (arrow keys) to select <1. RECEIVE MODE> press [Set]. Setting the Current Date and Time: 1 Press [Menu] or (arrow keys) to select <8. TIMER SETTINGS> on the LCD press [Set]. 3 Press or (arrow keys) until the desired receive mode appears press [Set]. 2 Press or (arrow keys) to select <1. DATE/TIME SETTING> press [Set]. You can select from the following: FaxOnly: If you use your machine to receive only faxes. Fax/Tel: When an extension telephone is connected to the machine as an external device, the machine automatically switches between faxes and voice calls. Voice calls must be answered on the extension telephone connected to the machine to prevent interference from the fax tone. AnsMode: If you want to receive faxes automatically and route voice calls to an answering machine connected to the machine as an external device. 3 Press or (arrow keys) to select the month, day, year, and time (in 24-hour format) enter the current date and time using the numeric keys. 4 Press [Set] [Stop/Reset] to return to the standby display. - 10 - DRPD: To distinguish between fax and voice calls by using Distinctive Ring Pattern Detection. 8 Press or (arrow keys) to select <2. TEL LINE TYPE> press [Set]. NOTE The DRPD mode requires subscription to a DRPD service. For more information, contact your local telephone company. Manual: When an extension telephone is connected to the machine, you can receive faxes by pressing [B&W Start] before hanging up the extension telephone. 4 Press or (arrow keys) to select <2. USER SETTINGS> press [Set]. 9 Press or (arrow keys) to select <TOUCH TONE> or <ROTARY PULSE> press [Set]. 10Press [Menu] to go back one level or (arrow keys) to select <2. UNIT NAME> press [Set]. 5 Press or (arrow keys) to select <1. TEL LINE SETTINGS> press [Set]. 11Enter the unit name using the numeric keys max. 24 characters, including spaces press [Set]. NOTE 6 Press or (arrow keys) to select <1. UNIT TEL NUMBER> press [Set]. For details on how to input characters, see P 2-1, "Guidelines for Entering Numbers, Letters, and Symbols, " in the Facsimile Guide. 7 Enter your fax number using the numeric keys press [Set]. 12Press [Stop/Reset] to return to the standby display. Congratulations!You have now completed the machine setup. Where to go from here. . . Once you have completed all steps in this document, see the next chapter "Printing, PC Faxing, Scanning, and Networking" to set up the machine for use in a network and to install driver software. 2 Press 3 Press 4 Press 5 Press or or or or or (arrow keys) to select <6. NETWORK SETTINGS> on the LCD (arrow keys) to select <1. LAN SETTINGS> press [Set]. (arrow keys) to select <1. IP ADDRESS AUTO. > press [Set]. (arrow keys) to select <OFF> press [Set]. (arrow keys) to select <2. IP ADDRESS> press [Set]. 6 Enter an IP address of the machine using the numeric keys press [Set]. Numbers move right to left in each section when entered. Write down the IP address you entered: _______ . _______ 7 Press or (arrow keys) to select <3. SUBNET MASK> press [Set]. 8 Enter the subnet mask using the numeric keys press [Set]. Numbers move right to left in each section when entered. Write down the subnet mask you entered: _______ . _______ 9 Press or (arrow keys) to select <4. DEFAULT GATEWAY> press [Set]. 10 Enter the default gateway address using the numeric keys press [Set]. Write down the gateway address you entered: _______ . [. . . ] For details, see the Software Guide. Sheet Editor Scanner The scanner driver enables you to scan printed documents into your computer. MF Toolbox enables you to process scanned documents in various ways. NetSpot Device Installer enables you to set up the machine for network operations. For details, see the Readme file and Online Help for this program. Driver (ScanGear) MF Toolbox NetSpot Device Installer (NSDI) Applications NewSoft Presto! [. . . ]