User manual CANON DR-5010C

[. . . ] Document Scanner Startup Manual Please read this manual before operating this unit. After you finish reading this manual, store it in a safe place for future reference. International ENERGY STAR® Office Equipment Program As an ENERGY STAR® Partner, Canon Electronics Inc. , has determined that this machine meets the ENERGY STAR® Program guidelines for energy efficiency. The International ENERGY STAR® Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. [. . . ] To view information about using CapturePerfect, click [Help] on the menu bar. 8. After scanning is complete, select [Exit] on the [File] menu to quit CapturePerfect. 38 Using the Software Starting CapturePerfect with the Event Function DR-5010C and CapturePerfect support Windows Scanner Event function. By installing the ISIS/TWAIN driver and CapturePerfect, CapturePerfect starts automatically when the scanners Start Button is pressed. Note Windows NT does not support this function. Confirming Scanner Event 1. Double-click the [Scanners and Cameras] icon. Note · [Scanners and cameras] is not displayed on Windows NT. · The dialog box that appears varies depending on the version of Windows being used. - On Windows 98SE/2000 the [Scanners and Cameras Properties] dialog box appears. - On Windows Me/XP the [Scanners and Cameras] folder opens. Using the Software 39 2. Select [Canon DR-5010C SCSI] (or [Canon DR-5010C USB]), and then click the [Properties] buton to display Properties. 3. Click the [Events] tab. 40 Using the Software 4. Make sure that [CapturePerfect] is checked. Note · When an application is started by an event, it may not work correctly depending on the application. · To disable the Event function, check the [Disable device events] check box. · Restart Windows to enable new settings after changing the event settings. Using the Software 41 Using the Scanner Documents This scanner can scan documents ranging in size from business cards and checks to 11. 6" x 17"/A3 size documents. The size of documents that can be scanned is shown below. Eject Direction (*1) Width Length Weight (*2) Feeding documents are separated Feeding documents are not separated U-Turn Path 2. 08" to 11. 8" (53 mm to 300 mm) 2. 75" to 17" (70 mm to 432 mm) 14 to 32 lb bond (52 to 128g/m2) 0. 0024" to 0. 0059" (0. 06 mm to 0. 15 mm) 11 to 40 lb bond (42 to 157g/m2) 0. 0020" to 0. 0079" (0. 05 mm to 0. 20 mm) Cannot be scanned Straight Path 2. 08" to 11. 8" (53 mm to 300 mm) 2. 75" to 17" (70 mm to 432 mm) 14 to 32 lb bond (52 to 128g/m2) 0. 0024" to 0. 0059" (0. 06 mm to 0. 15 mm) 11 to 144 lb bond (42 to 546g/m2) 0. 0020" to 0. 026" (0. 05 mm to 0. 66 mm) Can be scanned (not separated) Size: 2. 12" x 3. 37" (53. 9 mm x 85. 5 mm) Thickness: 0. 03" ± 0. 003" (0. 76 ± 0. 08 mm) without embossing Business cards (*1) For information about eject directions, see "Document Eject Tray, " on p. (*2) For information about feeding documents, see "Placing a Document for Scanning, " on p. IMPORTANT A document must meet the following criteria to be scannable: · When scanning a multi-page document, pages must be grouped together so that they have the same size, thickness, and weight. Scanning different types of paper at one time can cause the scanner to jam. · Scanning documents before the ink is dry can cause problems with the scanner. Always make sure that the ink on a document is dry before scanning it. 42 Using the Scanner · Scanning documents that are written in pencil or similar material can make the rollers dirty, which can then transfer the dirt to subsequent documents. Always clean the rollers after scanning a document written in pencil. · When scanning a two-sided document that is printed on thin paper, the image on the opposite side of each page may show through. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. [. . . ]