User manual CANON DR-5060F HYBRID

[. . . ] DOCUMENT SCANNER INSTRUCTIONS Space E Backup FILM F Count Only New File Scanner Feeding Option A Manual Auto Semi-Auto FCC REGULATIONS (For 120V models) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. [. . . ] to 0. 007 in. )) Follow the following guidelines when you prepare a document for scanning: q Do not scan documents with ink still wet. If documents are scanned with ink still wet, the inside of the scanner may become dirty. Be sure to allow wet ink on documents to dry before they are scanned. q If you scan a document written in pencil, the letters may disappear as the document is fed through the scanner or graphite from the surface of the document may transfer to and stain the scanning rollers. Before you scan these kind of documents, make a copy on a copier and then scan the copy. If you have scanned a document written in pencil or some other soft writing materials by mistake, be sure to clean the scanning rollers after scanning. (See “Cleaning the Scanning Glasses and Rollers” P. 75) q If you scan thin paper in the duplex mode, ink printed on one side may be legible on the other side. q If you scan a slippery surface document, friction may cause a feed error to occur. If this happens, slide the paper feed adjustment lever (See “Paper Feed Adjustment” P. q To avoid paper jams, damage to documents and scanner malfunction, do not feed the following types of paper into the scanner. If you want to scan these types of paper, first make a copy on a copier and then scan the copy. Wrinkled or creased paper Curled paper Carbon-backed paper Coated paper Torn paper Onion skin or other thin paper Paper with clips or staples Paper with binding holes 42 About Documents MEMO q Documents comprising pages of differing thickness and size may cause a malfunction during feeding. q Heavily curled documents or wrinkled or creased paper may cause erroneous double feed detection. q Documents containing text or pictures within 5 mm (0. 1 in. ) from its edges or documents with a color background may cause erroneous skew detection or automatic size detection. Document Loading Precautions Observe the following cautions when loading documents on the scanner’s document tray: q Before you load the document on the scanner, be sure to tap the document sheets on a desk, for example, so that the edges of the sheets are aligned. q Load documents on the document tray face up. q Load documents so that their top edges are inserted as far as possible into the scanner. Feeding Option A 3 Preparing Documents Manual Auto Semi-Auto q Do not load documents beyond the mark on the document tray. As a rough guideline, the maximum amount of documents that can be stacked on the document tray is about 500 sheets of PPC A4/(11. 5 x 16. 3 in. )-size paper (80 g/m2 or 20-lb. bond), or about 200 sheets of paper larger than A4/(11. 5 x 16. 3 in. ). q If the document tray does not rise after loading documents on the document tray and you hear a clicking sound, a probable cause is that the document stack weight is heavier than specified even if the load is lower than specified mark on the document tray). Reduce the number of pages to load (below the on the document tray, and try scanning again. Small Size: When A4/(11. 5 x 16. 3 in. ) or smaller size documents are loaded Large Size: When documents larger than A4/(11. 5 x 16. 3 in. ) size are loaded q Be sure to use both hands when adjusting the document guides. About Documents 43 Setting Scan Conditions This page explains the functions that can be set on the function keys, Feeding Option key, and brightness key on the operation panel. 1 2 3 4 5 6 Function keys Space/Trailer Backup E FILM F Count Only New File Scanner Feeding Option A Manual Auto Semi-Auto Brightness key Feeding Option key The following functions can be set on the operation panel: q Setting brightness (Brightness key) Adjust the brightness at which the document is scanned. This setting is disabled for the density at which images are photographed on the filmer. 16) q Setting the feeding option (Feeding Option key) Set the feeding operation for the document. [. . . ] Clean these holes with a cotton wool bud. 5 Daily Cleaning Daily Cleaning 81 Specifications <Scanner> Type Document size Desktop sheet fed type Width: 55 to 297 mm/2. 2 x 11. 7 in. to 0. 005 in. ) (auto feeding) 0. 05 to 0. 20 mm (0. 001 in. to 0. 007 in. ) (manual feeding) Manual/automatic/semi-auto Contact image sensor (CMOS) Green/red single-line LED array Black and white, Error diffusion, Gray scale 4/16/256 levels Simplex/Duplex Document feeding Scanning method Light source Scan mode Scanning side Scanning resolution (primary scanning direction x secondary scanning direction) 200 x 100 dpi 300 x 150 dpi 200 x 200 dpi 240 x 240 dpi 300 x 300 dpi Scanning speed (A4/(11. 5 x 16. 3 in. )-size document) Black and white Simplex 200 x 200 dpi 50 sheets/min Duplex 200 x 200 dpi 50 sheets/min Gray scale Simplex 200 x 200 dpi 27 sheets/min 300 x 300 dpi 15 sheets/min Duplex 200 x 200 dpi 19 sheets/min 300 x 300 dpi 9 sheets/min Filmer Only mode 200 x 200 dpi 50 sheets/min or equivalent Automatic feed capacity A4 (LTR) or smaller: Max. bond) Interface SCSI-II Other functions Automatic paper size detection, Automatic paper thickness adjustment, Document sheet count function, AE, Double feed detection, Skew compensation, Dropout color, Number of fed sheets counter, etc. [. . . ]