User manual CANON DR-6080

[. . . ] CANON DOCUMENT SCANNER INSTRUCTIONS CANON ELECTRONICS INC. 1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U. S. A. 6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N. V. BOVENKERKERWEG 59-61, P. O. BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS CANON LATIN AMERICA, INC. [. . . ] ● Heavily curled wrinkled, or creased documents may cause them to double feed. ● Documents containing text or pictures within 0. 2" (5 mm) of its edges or documents with a color background may cause erroneous skew detection or automatic size detection. How to Place Documents Note the following points when placing documents on the scanner. ● Place the documents face up in the document tray. ● Do not exceed the load limitation mark when placing documents in the document tray. It may cause paper jams. 4 Small Size Limitation Mark: When placing documents that are smaller than LTR/A4 size. Large Size Limitation Mark: When placing documents that are larger than LTR/A4 size. ● It is possible to place approximately 500 documents of regular LTR/A4 size (80g/m2 or 20 lb bond), or approximately 200 documents of larger than LTR size. ● If the document tray does not rise and makes a “clacking” noise, then the amount of paper placed on the document tray may weigh too much even if the documents do not exceed the limitation mark. Reduce the amount of pages and scan the documents again. ● In the Long Document mode, if you place a long document askew in the document tray, it will rub against both sides of the feeding path and may damage the document. Be sure to align the document straight when placing it in the document tray. (See p. 61. ) 43 Chapter 4 Document Feeding and Scanning Document Feeding and Scanning This section describes how to place the document in the document tray, the procedure until scanning begins, the count only mode for counting the number of sheets, and the patch code sheet for automatically separating batches of documents. CAUTION ■ Avoid wearing loose fitting clothing, dangling jewelry, long ties, or even long hair that could become entangled with moving parts, especially the rollers that feed the paper. If such objects become entangled, immediately disconnect the power plug from the power outlet to stop the scanner. ■ Check the stack and remove all clips, staples, pins, or any other type of metal or plastic fastener. They may damage the document, cause a paper jam, or scanner malfunction. Scan Procedure The procedure for scanning a document varies depending on how the document is fed. There are four ways to feed documents as shown below. Select [Feeding Option] on the ISIS/TWAIN driver’s settings screen. ● Standard Feeding (See p. 45. ) This feeding mode is selected from the application to start or stop scanning. Instruct the scanner to start scanning from the computer after the document is placed in the scanner. ● Panel-Feeding (See p. 46. ) This feeding mode is useful when you want to continuously scan batches of documents that are different sizes. Place the document and adjust the document guides, then press the Start key on the scanner. When scanning is finished, place the next document on the scanner and press the Start key to continue scanning. ● Automatic Feeding (See p. 48. ) This feeding mode is useful when scanning documents that are all the same size. [. . . ] 12 Skew detection function . . . . . . . . . . . . . . . . . . 58 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 - How to use the software . . . . . . . . . . . . . 36 - Install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]