User manual CANON DT-130 TYPE SFP BROCHURE

[. . . ] With the introduction of 16 bit resolution Rotary Encoder Devices built into the new enhanced digital drive unit, the lens can simply be integrated into a virtual digital studio system without any additions. The encoders also enable superior precise control. The zoom servo provides a dynamic range of 0. 5 sec. Repeatability in focus and iris control are also much more precise. [. . . ] Canon's unique technology has made the Encoder Device surprisingly small to be installed in the existing drive unit without changes in size or weight. Informational Display Canon’s Philosophy Canon has always developed new technology with four basic philosophies, "High Quality of Picture", "Ease of Operation", "High Specification" and "Minimize Environmental Impact". Canon's HDTV lenses are, so to speak, a compilation of our basic philosophies. Canon is the only manufacturer to offer a complete line of HDTV lenses to match our customers requirements. Complete "Customer Satisfaction" is our goal. VTR switch [Aux2]switch for enhanced operation [Aux1]switch for enhanced operation Memory Switch Overall Comparison Between HDTV and SDTV Whereas one frame of the conventional SDTV (ie NTSC) system consists of 480 scanning lines, the number of scanning lines is more than 1. 5 times that for the HDTV system. Furthermore the density of the scanning lines are even higher because the HDTV system has an aspect ratio of 16:9, which is wider and shorter in height than that of the normal SDTV (4:3 aspect ratio) system. The spatial frequency required for the HDTV system is about twice that required for the NTSC system. Overall, the resolution of the HDTV system is about twice that of the NTSC system and therefore, the lens requires much higher performance than the conventional lenses. 2/3 inch HDTV Image format 9. 6i5. 4 Nominal frequency 600TVL Spatial frequency 55line pairs/mm HDTV 16:9 SDTV 4:3 SDTV 8. 8i6. 6 400TVL 30line pairs/mm Internal Rotary Encoder Devices Ecological Design 6. 6 5. 4 ɂ11 8. 8 Canon’s Technology 9. 6 Crossover Mode For switchable cameras. (Option) Canon proudly offers our Broadcasting Lens Technology, . The technology consists of two meanings that start with the letter "e". One is the "ecological design", a design harmless to the environment. The spatial frequency required for the HDTV system is about twice that required for the NTSC system. Overall, the resolution of the HDTV system is about twice that of the NTSC system and therefore, the lens requires much higher performance than the conventional lenses. 2/3 inch HDTV Image format 9. 6i5. 4 Nominal frequency 600TVL Spatial frequency 55line pairs/mm HDTV 16:9 SDTV 4:3 SDTV 8. 8i6. 6 400TVL 30line pairs/mm Internal Rotary Encoder Devices Ecological Design 6. 6 5. 4 ɂ11 8. 8 Canon’s Technology 9. 6 Crossover Mode For switchable cameras. (Option) Canon proudly offers our Broadcasting Lens Technology, . The technology consists of two meanings that start with the letter "e". One is the "ecological design", a design harmless to the environment. The other is the "enhanced digital" technology which improves the performance of the digital drive unit. Of course the new technology inherits all the advantages of its predecessor, the HDxs technology, which includes the advanced optical design concept, based on the X-Element technology. Lens with the Optional Encoder Unit Lens with Encoder Devices included in the drive unit Built-in 2x Extender Short M. O. D. Mass (IRSE/IASE) All lenses are equipped with an informational display and Digital Function Selector, an X-Y axis switch, so that the user can customize the enhanced digital functions much more easily and precisely. This new design enables the user to fully bring out the digital functions. 65. 4i36. 8cm at 7. 6mm 32. 7i18. 4cm at 15. 2mm 59. 9i44. 9cm at 6. 3mm 49. 1i36. 8cm at 7. 6mm 24. 6i18. 4cm at 15. 2mm 4. 00i2. 30cm at 130mm 2. 00i1. 20cm at 260mm 3. 70i2. 80cm at 107mm 3. 10i2. 30cm at 130mm 1. 60i1. 20cm at 260mm WiHiL = 164. 0i106. 5i206. 4 mm 1. 62Kg (3. 56lbs) / 1. 72Kg (3. 78lbs) Main Featur es Shuttle Shot By memorizing any two focal lengths, the Digital Drive can automatically "shuttle" between the two points, moving in either direction. DIMENSIONS 206. 4 48 0. 03 (in air) VTR SWITCH INFOMATION DISPLAY On/Off SWITCH INFOMATION DISPLAY DIGITAL FUNCTION SELECTOR AUX1 SWITCH F. B. ADJUSTING LOCK SCREW INDEX MARK Framing Preset An angle of view can be preset in either of two memories and the lens will zoom to that position by pushing a simple button. [. . . ] ADJUSTING LOCK SCREW INDEX MARK Framing Preset An angle of view can be preset in either of two memories and the lens will zoom to that position by pushing a simple button. During a performance, framing preset will reproduce the zoom position decided upon at the rehearsal. It's easy to repeat the same zoom as often as you like at the highest speed or in a preset zoom speed. 85 MACRO BUTTON EXTENDER LEVER 52. 9 IMAGE PLANE HOOD CONNECTOR FOR REMOTE ZOOM CONTROL (8 PIN) CONNECTOR FOR ZOOM REMOTE & FOCUS REMOTE & VIRTUAL UNIT (20 PIN) CONNECTOR FOR ZOOM REMOTE & FOCUS REMOTE UNIT (20 PIN) Speed Preset A specific zoom speed can be preset in memory and it is possible to repeat the zoom speed as often as you like by pushing a simple button. ZOOM OPERATION CHANGE-OVER KNOB ZOOM SPEED VOLUME ZOOM LEVER 40. 6 164 119. 7 57. 9 39. 5 44. 25 45 HJ17ex7. 6B IRSE/IASE (Unit:mm) Contr ol Accessories # 2 6 8 0 A B C D F G I J K L P R V W Unit Description FFM-100 Flex Focus Module FFM-200 Flex Dual Module FC-40 Flex Cable FFC-200 Flex Focus Controller FZC-100 Flex Zoom Controller FPM-420 Focus Positional Servo Module FPM-420D Focus Positional Servo Module FPM-500 Focus Positional Servo Module FPD-400 Focus Positional Demand FPD-400D Focus Positional Demand ZSD-300A*/M Zoom Demand (A or M types, depends on applicable camera) ZSD-300D Zoom Demand ZSG-200A*/M Zoom Servo Grip (A or M types, depends on applicable camera) CR-10 Clamper ZGA-400* * Grip Adapter EC-80 Zoom Extension Cable (8P) CC-2006 Conv. Cable (20pM-12pF) CODE 1824A015 1824A013 1824A010 1824A014 1824A021 1824A026 1824A129 1824A027 1824A018 1824A124 1824A066 1824A067 1824A123 1824A068 1824A069 1824A007 0025T616 1824A009 1824A125 1824A126 20p 2 8 20p 12p 8p 8p C B 6 0 20p 8p PQ J G 6p A M A M K I F R 8p A L K (❈1) W CC-2012 conversion cable is necessary to connect between IRSD Digital Drive Lens and FPM-420. [. . . ]