User manual CANON EOS 1N

[. . . ] While reading this manual, take pictures as instructed and check the results. This is how you can learn to use the camera and better enjoy photography. To prevent botched pictures and accidents, read the Safety Warnings (p. 10, 11) and Handling Precautions (p. 12, 13). Test the Camera Before Using After shooting, playback and check the image whether it has been properly recorded. If the camera or memory card is faulty and the images cannot be recorded on the card or be read by a personal computer, Canon cannot be held liable. Copyrights Copyright laws in your country may prohibit the use of your recorded images of people and certain subjects for anything but private enjoyment. [. . . ] (Mired: A measurement unit indicating the density of a color temperature conversion filter. ) 88 3 White Balance CorrectionN White Balance Auto Bracketing With just one shot, three images having a different color tone can be recorded simultaneously. Based on the white balance mode's standard color temperature, the image will be bracketed with a blue/amber bias or magenta/green bias. This is called white balance bracketing. White balance bracketing is possible up to ±3 levels in single-level increments. Set the white balance bracketing amount. In step 2 for white balance correction, when you turn the <6> dial, the " " mark on the screen will change to " " (3 points). Turning the <6> dial to the right sets the B/A bracketing, and turning it to the left sets the M/G bracketing. On the right side of the screen, "BKT" indicates the bracketing direction and the bracketing amount is also displayed. Press <0> to exit the setting and return to the menu. To cancel the bracketing, set "BKT" to "±0" (" " to " " (1 point)). B/A bias ±3 levels Bracketing Sequence Correct white balance, blue bias, and amber bias. Or, correct white balance, magenta bias, and green bias. If the image-recording quality is set to RAW or RAW+73, white balance bracketing cannot be used. With white balance bracketing set, the maximum burst will be fewer during continuous shooting. The number of possible shots will also decrease to about one-third the normal number. delay, then shoot. If <i> (Continuous shooting) has been set, single shooting will still take effect. The mirror locks up, and after 30 seconds, it will go back down automatically. Pressing the shutter button completely again locks up the mirror again. 91 Handy Features This chapter introduces convenient everyday features such as silencing the beeper and preventing shooting without a CF card installed. It also teaches how to customize camera functions to suit your preferences, transfer images directly to a personal computer, and prevent dust from appearing on your images. 5 93 Handy Features 3 Silencing the Beeper You can prevent the beeper from sounding when focus is achieved or during self-timer operation. Under the [z] tab, select [Beep], then press <0>. Select [Off], then press <0>. 3 CF Card Reminder This prevents shooting if there is no CF card in the camera. Under the [z] tab, select [Shoot w/o card], then press <0>. If there is no CF card installed and you press the shutter button, "no CF" will be displayed in the viewfinder, and you cannot release the shutter. 3 Setting the Image Review Time How long the image is displayed on the LCD monitor immediately after capture can be set. If [Off] is set, the image review will not be displayed. If [Hold] is set, the image review will be displayed up until the [Auto power off] time. The LCD monitor display will turn off if you put your eye near the viewfinder, press the shutter button, or do any camera operation. [. . . ] 80 Sepia / Blue / Purple / Green Transfer order (image) . . . . . . . . . . . . . . . . . 109 Trimming (printing) . . . . . . . . . . . . . . . . . . . . . . . 142 Tv (Shutter-priority AE). . . . . . . . . . . . . . . . . . . 66 S Saturation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79, 135 Self-timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Shutter release after 2-sec. [. . . ]