User manual CANON EOS-1V HS BODY BROCHURE

[. . . ] anything is missing, contact your dealer. ¢ Wireless File Transmitter WFT-E1A ¢ Normal Antenna NA-E1 ¢ Interface Cable IFC-15D4 Cable approx. 15 cm/0. 5 ft long to connect to the <a> (IEEE 1394) port. Used when the WFT-E1A is attached to the camera's tripod socket. ¢ Interface Cable IFC-150D4 Cable approx. [. . . ] ¡ The [nprofile. nif] file name cannot be changed. ¡ To load the settings file into the camera, see page 27. Save the settings file to the root directory of the memory card. If the settings file is nested inside another folder, the camera will not be able to read it. By selecting [File] / [Open], the communications setting file saved in the memory card or hard disk can be read. 17 Registering the Settings in the Software You can name the settings and save up to 20 settings for WFT-E1A Utility. The settings can also be registered according to the operating environment such as infrastructure and ad hoc. [Settings list] When you click on the [Settings list] field, the registered settings will appear in a pulldown menu. The selected item will be read by WFT-E1A Utility. [Register] button Click this button to display the setting's register screen. Enter the name to be registered (up to 20 characters) and click [OK]. The setting will be registered in [Settings list] . [Delete] button This deletes the registered file displayed in the [Settings list] field. [Update] button This updates the registered file displayed in the [Settings list] field to the setting being edited. 18 Setting Up the WFT-E1A This chapter explains the WFT-E1A's nomenclature and preparatory steps for image transfers. 2 2 19 Nomenclature For detailed information, reference page numbers are provided in parentheses (p. **). IEEE 1394 port (p. 26) USB port (p. 26) Battery compartment cover (p. 22) Battery compartment cover release lever (p. 22) Antenna socket (p. 25) Antenna (p. 25) Tripod screw hole Power lamp (p. 26) LINK lamp (p. 30) LCD panel (p. 21) Power switch (p. 26) Ethernet RJ-45 port 20 Nomenclature LCD Panel Wireless LAN connection status Link speed (** Mbps) Error number (** ERROR) Wireless signal strength Battery check P QS 2 Setting Up the WFT-E1A Wired LAN connection status Camera connection status Case Strap (commercially available) mounts Belt holder Normal antenna pocket Water and dust resistance is further improved by using the WFT-E1A inside the supplied case. Under extreme operating conditions, insert the WFT-E1A into the supplied case during usage. 21 Installing and Removing the Battery The WFT-E1A can be powered by Battery Pack BP-511A, BP-514, BP-511, or BP-512. The battery pack and Battery Charger CB-5L or CG-580 do not come with the WFT-E1A. Purchase them separately if necessary. Installing the Battery 1 2 3 Open the battery compartment cover. ¡ Push down the release lever and slide the cover to the left. Insert the battery. ¡ The battery contacts must face upward. Connect the WFT-E1A and camera and turn on both. Display the menu screen. ¡ Select the Setup menu category. 2 Setting Up the WFT-E1A Select [Image transfer (LAN) settings]. ¡ [Image transfer (LAN) settings] will not be displayed if the WFT-E1A and camera are not connected and turned on. Select [LAN setting]. ¡ English will be displayed for any language that the WFT-E1A is not compatible with. 27 Setting the LAN 6 7 8 9 Select [Set up]. Select the Set No. of the settings file you want to load. ¡ You can have up to five settings from [Set 1] to [Set 5]. Select [Load settings]. Select [OK]. a The settings file will be loaded into the selected Set No. Selecting the Settings (Set No. ) Do steps 2 to 5 on page 27. that suits the LAN environment you are using. 28 Selecting the LAN Type Set the image transfer for the wireless LAN or wired LAN. 1 2 3 Select [Image transfer (LAN) settings]. ¡ [Image transfer (LAN) settings] will not be displayed if the WFT-E1A and camera are not connected and turned on. 2 Setting Up the WFT-E1A Select [LAN type]. ¡ English will be displayed for any language that the WFT-E1A is not compatible with. Select the LAN type to be used. 29 Checking the Connection Status You can check the status of the connection between the WFT-E1A and camera with the WFT-E1A's LCD panel and lamp. Checking the Connection Status of the Wireless LAN Check the connection right near the wireless LAN access point (or wireless LAN adapter). Successful connection display ¡ The LCD panel, <3> lamp, and <4> lamp will light. ¡ The number indicates the link speed. Failed connection display ¡ The LCD panel will show <E> and the error number (p. 52). The <B> and <3> lamps will also blink. ¡ The more <A> bars there are, the more stable the image transfer will be. ¡ The greater the link speed number, the faster the image transfer will be (the actual image transfer speed will be different). Checking the Connection Status of the Wired LAN First connect the WFT-E1A and FTP server with a LAN cable. Successful connection display ¡ The LCD panel, <3> lamp, and <4> lamp will light. Failed connection display ¡ The LCD panel will show <E> and the error number (p. 52). The <C> and <3> lamps will also blink. 30 Checking the Connection Status When switching from a wired LAN to a wireless LAN, be sure to keep the LAN cable connected. If you switch to a wireless LAN while the cable is already disconnected, a connection with the wireless LAN might not be established. If <E 81> (p. 52) does not disappear, turn the power switch off and on again. ¡ Use a category 5 or higher LAN cable. [. . . ] 16, 48 Proxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 46 Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 R RAW+JPEG Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Registering the Settings . . . . . . . . . . . . . . . . . . . . . . . . 18 S Save Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 48 Select. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Server name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Settings File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 17, 27 Shared key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 SSID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]