User manual CANON ES2500 BROCHURE

[. . . ] Caution Precauzioni da adottare con la stampante ??????????Vorsichtsmanahmen bei Inbetriebnahme des Druckers ????Precauciones al manipular la impresora Attention Attenzione Vorsicht Precaucion ??Moving the printer requires at least two people, one on either side. [. . . ] Fasten a paper band or the like around the paper to prevent the roll from unwinding. Assembling and Installing the Desktop Basket Assemblage et installation du panier de bureau Assemblaggio e installazione del raccoglitore da scrivania ??????????Aufbau und Installation des Desktop-Korbes ???Montaje e instalacin del cesto de escritorio ?Put the Basket Table (K) on a desk or other ?at surface and push it against the desk to eliminate any space between the side of the Basket Table (a) and the edge of the desk. 7) in "Assembling the Output Stacker and Installing the Stand". Holding the printer on both sides by the Carrying handles, set it on top of the black parts (b) of the Basket Table (K). Slide the printer gently back to load it into the Basket Table. Align the printer with the diagonal line (c) on the left side of the black part (b). Be careful to avoid pinching your ?ngers between the Output Stacker and Stand. With the printer resting on the Basket Table (K), slide the Basket Table to the right. Use the Allen Wrench (R) to tighten the Table Bolts (G) and secure the Basket Table (K) to the Stand and Table Stay (E). For ST-24, tighten the Table Bolts (G) in the order indicated; ?rst at position ?Rotate the Basket Rods #1 (L) on both sides all the way toward the front ( ?) and then return them to the position at which they lock into place ( ?Insert Basket Wire #1 (S) into the hole on the side of the Basket Cloth (M) without the Velcro Tape. Keeping the Velcro Tape side face-down, insert both basket wires into the holes on both sides of the Basket Table (K). Insert Basket Rod Caps (O) on both ends of Basket Rod #2 (N) until the guide lines (h) are no longer visible. Insert the Basket Rod Caps (O) onto the left and right Basket Rods #1 (L) until the guide lines (i) are no longer visible. With Basket Wire #2 (P) positioned so that the bend faces forward, insert it in the hole of the Basket Table (K) from below. Fold the Basket Band (Q) in two and secure it with the Velcro Tape ( ?Push Basket Wire #2 (P) toward the back ( ? [. . . ] However, for the following media, it can also be used in the extended position. Documents can be removed more easily when the stacker is in the extended position. 0836V769 LFM-PP240S RJPH-24 RJPH-04 ?????????A2 24"x36" 24"x36" A1 *1??????? [. . . ]