User manual CANON SELPHY ES8600 ES8600 8MM VIDEO CAMCORDER NTSC-E INSTRUCTION MANUAL

[. . . ] 8mm VIDEO CAMCORDER Instruction Manual CAMESCOPE ET LECTEUR VIDEO 8 mm ENGLISH E FRANÇAIS Mode d'emploi VIDEOCAMARA Y GRABADORA DE VIDEO 8mm F ESPAÑOL Manual de instrucciones Es NTSC E Important Usage Instructions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. 8mm Video Camcorder, ES8600A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Introduction Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and use in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] · Keep the image stabilizer turned off when the camera is mounted on a tripod. · The image stabilizer is not as effective as usual when the optional wide-converter or tele-converter is attached. · You cannot use the image stabilizer simultaneously with the 16:9 format, mirror, strobe, or ghost digital effects. · When you activate one of these digital effects, the image stabilizer turns off automatically and the i mark blinks for 4 seconds in the display then disappears. · If a digital effect is turned on first, the image stabilizer becomes inoperable: · When you open the menu, IMAGE S. i shows "- - -". · When Custom Key 2 is set to the image stabilizer and you press it, the i mark blinks for 4 seconds in the display then disappears. Advanced Functions 31 E Setting the Date and Time 1:23 PM JUN. 1, 2003 (see p. 27) DATE DISPLAY. . . OFF Choose whether to add the date and time to your recordings by selecting DATE DISPLAY and choosing one of the 3 options shown below. You can also select the display color from among 7 colors by selecting DATE/TITLE CLR on the Camera menu. After you have selected a display color, do not remove the battery pack before actual recording. Your selected color will return to white when you remove (change) the battery pack (except when you are using the power adapter) or remove/connect the power adapter. AUTO­10S: Advanced Functions Adds the date and time to your recordings for the first 10 seconds of each scene you record. · The date/time display flashes in Record Pause mode. The date and time will not be added to your recordings at any time. The date and time are recorded continuously. OFF: CONT. : If you set the date display to AUTO­10S or CONT. but have not yet set the date and time, ­:­ ­ will appear in the display during Record Pause mode. · If you change the date/title color, the date and title will be displayed and recorded in the selected color. 32 E Setting the date and time Set the date and time display when you first start using your camera. As long as you have inserted the backup battery (p. 58), the camera's internal clock will continue to work even when the main power source is removed. DATE SET (see p. Open the camera menu to screen 2 and choose the DATE SET option. · The year display starts flashing. 2. Press the controller up and down to change the year. Press sideways to move to another part of the display. · Press once to scan a year at a time. [. . . ] 43) Digital effects: The display flashes when the effect is being selected, and appears steadily when it is activated (p. 47­50). 1 : 23 : 45 MF BLC AR T B L K&WH T SEP I A N EGAT I V E M I R RO R MO S A I C 16 : 9 C I NEM A S T RO B E GH OS T The tape counter indicates the approximate running time of the tape -- 1 hour, 23 minutes and 45 seconds in this example. The tape counter is reset when a cassette is loaded, or when you press the C. RESET button (p. 8). Recording reminder 0sec 10sec Additional Information When you start recording, the camera counts from 0sec to 10sec (for PHOTO recording from 0sec to 6sec). [. . . ]