User manual CANON FR-100 BROCHURE

[. . . ] Canon shall not be liable for any damage to this product and/or accidents such as fire, etc. , caused by the malfunction of non-genuine Canon accessories (e. g. , a leakage and/ or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis. Camera Body Temperature If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. About the LCD Monitor The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99. 99% of the pixels operate to specification. [. . . ] 45). 3 4 Use the or [On] or [Off]. button to select You can shoot right after selecting an option. Press the MENU button. The display will return to the Shooting screen. The center AF frame mode is used when the digital zoom is activated. 73 Switching between Light Metering Modes You can switch between metering modes to shoot. Appropriate for standard shooting conditions, including backlit scenes. The camera divides images into several zones for light metering. It evaluates complex lighting conditions, such as the position of the subject, the brightness, the direct light, and the backlighting, and adjusts the settings to the correct exposure for the main subject. Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center. Meters the area within the spot AE point at the center of the LCD monitor. Use this setting when you want to set the exposure on the subject in the center of the monitor. Evaluative CenterWeighted Average Spot 1 2 Slide the mode switch to (Shooting) and select or the FUNC. Select from See Selecting a Shooting Mode (p. menu. See Selecting Menus and Settings (p. 45). *The current setting is displayed. 3 Use the or button to switch between metering modes. You can shoot right after selecting an option. The menu displays again after the shot, allowing you to change the settings easily. 4 74 Press the SET/FUNC. This camera, however, applies special processing to images shot at shutter speeds slower than 1. 3 seconds to eliminate the noise, thereby producing high-quality images. Nevertheless, a certain amount of processing time may be required before the next image can be shot. · Please note that camera shake becomes a factor at low shutter speeds. If the camera shake warning appears on the LCD monitor, secure the camera to a tripod before shooting. · Use of the flash may result in an over-exposed image. If that occurs, shoot with the flash set to . Available Shutter Speeds The following shutter speeds (in seconds) are available. 1 1. 3 1. 6 2 2. 5 3. 2 4 5 6 8 10 13 15 78 Adjusting the Tone (White Balance) When the white balance mode is set to match the light source, the camera reproduces colors more accurately. Auto Daylight Cloudy Tungsten Fluorescent Fluorescent H The camera sets the white balance automatically according to shooting conditions. For recording under overcast, shady or twilight skies. For recording under tungsten and bulb-type 3-wavelength fluorescent lighting. For recording under warm-white, cool-white or warmwhite (3-wavelength) fluorescent lighting. For recording under daylight fluorescent, or daylight fluorescent-type 3-wavelength fluorescent lighting. Shooting 1 In Shooting Mode Slide the mode switch to (Shooting) and select , , , or from the FUNC. [. . . ] · Macintosh, PowerBook, Power Macintosh and Quick Time are trademarks of Apple Computer, Inc. , registered in the United States and other countries. · Microsoft, Windows and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. · Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies. Copyright © 2003 Canon Inc. All rights reserved. 166 FCC Notice (Digital Camera, Model PC1060) This device complies with Part 15 of the FCC Rules. [. . . ]