User manual CANON I-SENSYS MF4430

[. . . ] However, as we are constantly improving our products, if you need an exact specification, please contact Canon. The machine illustration on the cover may differ slightly from your machine. Table of Contents Index i TOP Back Previous Next Before Using the Machine 1 2 Document and Paper Copying Things You Can Do Select a scan mode depending on the type of image Sort copies by page order Specify a recipient with a single key 3 Sending and Receiving Printing and Scanning Network 4 5 6 Image Quality p. 3-6 One-Touch Speed Dialing Keys p. 4-12 Remote UI 7 System Manager Settings Maintenance Adjust the density level of scanned images Make two-sided copies Specify a recipient with a two-digit code 8 9 Density p. [. . . ] Then, wipe the area with a soft, dry cloth. 3 Sending and Receiving Printing and Scanning Network Platen glass 4 5 6 1. Open the ADF. Remote UI Do not dampen the cloth too much, as this may tear the document or damage the machine. 7 System Manager Settings Maintenance 3. Close the ADF. 8 9 Troubleshooting 10 Appendix 11 Be careful not to get your fingers caught. Table of Contents Index 9-8 TOP Back Previous Next Before Using the Machine 1 2 ADF If your documents have black streaks or appear dirty after copying them using the ADF, this may be caused by pencil lead rubbing off the documents and onto the roller. Clean the ADF scanning area and roller. Document and Paper Copying 3. Clean the rollers (A) inside the ADF with a cloth dampened with water. Then wipe the area with a soft, dry cloth. 3 Sending and Receiving Printing and Scanning Network 4 5 6 1. 2. Turn off the main power switch and disconnect the power cord. Open the ADF cover. Remote UI Do not dampen the cloth too much, as this may tear the document or damage the machine. 7 System Manager Settings Maintenance 8 9 Troubleshooting 10 Appendix 11 Table of Contents Index 9-9 TOP Back Previous Next Before Using the Machine 1 2 Document and Paper Copying 4. Close the ADF cover. 3 Sending and Receiving Printing and Scanning Network 4 5 Be careful not to get your fingers caught. 6 Remote UI 5. Reconnect the power cord and turn on the main power switch. 7 System Manager Settings Maintenance 8 9 Troubleshooting 10 Appendix 11 Table of Contents Index 9-10 TOP Back Previous Next Before Using the Machine 1 2 Document and Paper Copying Replacing the Toner Cartridge When the toner is running low, the message <TONER LOW/ PREPARE NEW TONER> appears on the LCD. We recommend that you prepare a new toner cartridge for future replacement with ease. When the message <OUT OF TONER /CHANGE TONER> appears, redistribute toner in the toner cartridge. If the message persists, replace the toner cartridge with a new one. When toner empty error occurs while receiving fax, printing fax is interrupted and the received data will be stored in the memory. PRINTING> in <PRINTER SETTINGS> in <FAX SETTINGS> to <ON>, you can keep printing fax documents or reports without replacing the toner cartridge. 11-13. ) Redistributing Toner 3 Sending and Receiving Printing and Scanning Network 1. Hold the front side of the operation panel with your hands. 4 5 6 Remote UI 7 System Manager Settings Maintenance 2. 8 9 Troubleshooting ­ When <CONT. Close the toner cover. ­ Be careful not to get your fingers caught. ­ If you cannot close the toner cover, do not force it to close. Open the cover and make sure the toner cartridge is properly set in the machine. Remote UI 7 System Manager Settings Maintenance 8 9 Troubleshooting 10 Appendix 11 Table of Contents Index 9-19 TOP Back Previous Next Before Using the Machine 1 2 Document and Paper Copying Recycling Used Cartridges Canon has instituted a worldwide recycling program for cartridges called "The Clean Earth Campaign". This program preserves precious natural resources by utilizing a variety of materials found in the used cartridges that are of no further use, to remanufacture new cartridges which, at the same time, keeps the environment cleaner by reducing landfill waste. Complete details concerning this program are enclosed in each Cartridge box. The remaining "Clean Earth" initiatives are supported in the U. S. through sponsorships of the National Park Foundation, the National Wildlife Federation, and The Nature Conservancy and in Canada through donations to the World Wildlife Fund Canada and The Nature Conservancy of Canada. Since its inception, The Canon Cartridge Recycling Program has collected huge amount of cartridges that otherwise would have been discarded into landfills or similar facilities. Instead, this rapidly growing program returns used cartridges to the manufacturing process, thus conserving an array of resources. Becoming a part of this worthwhile program is easy. When your cartridge is of no further use, simply follow the instructions detailed for U. S. [. . . ] The network management protocol of TCP/IP. In SNMP, agents, which can be hardware as well as software, monitor the activity of the various devices on the network and report to the network console workstation. Remote UI 7 System Manager Settings Maintenance RIP (Raster Image Processor) The hardware and/or software functions of a printer that convert vector graphic descriptions from a computer into raster graphic images that can be printed. Spool Simultaneous Peripheral Operations On-Line. Spooling means putting jobs in a buffer, which is a special area in memory or on a disk. Because devices access data at different rates, the buffer provides a waiting station where the data can wait until the device for which it is meant is ready to access it. 8 9 Rotary pulse A telephone dialing system where a dial is rotated to send pulses to the telephone switching system. [. . . ]