User manual CANON I-SENSYS MF522X

[. . . ] 11 Preparations for Using the Driver Pre-installation Check . 15 System Requirements About the Readme File Installing the Driver Registering a Printer . 22 Registering a Printer Connected by TCP/IP Registering a Printer Connected by USB Registering a Printer Connected by Bonjour Setting the Options of the Device Uninstalling a Driver . 7) 2 Introduction How to Use the Manual This explains things that you need to know in order to use this manual. [. . . ] 16) ● Confirmation of driver names corresponding to the printer For driver names corresponding to printers, refer to the Readme file. Procedures 1 2 Display the [System Preferences] dialog box of the operating system → click [Printers & Scanners]. Click [+] at the bottom of the displayed dialog box. if a pull-down menu is displayed after you click [+] , select [Add Printer or Scanner]. 3 Select [Default] in the toolbar → select a printer from the list. select a printer displayed as "Bonjour" in [Kind]. If the corresponding driver is already registered in [Use] in the displayed dialog box, proceed to step 7. 26 Installing the Driver 4 Select [Select Software] from [Use]. 27 Installing the Driver 5 6 7 Select the driver corresponding to the printer from the list in the [Printer Software] dialog box → click [OK]. Change [Name] for the printer as necessary → click [Add]. Check that the registered printer and model are displayed in the dialog box. Related Topics Preparations for Using the Driver(P. 15) Setting the Options of the Device(P. 29) 28 Installing the Driver Setting the Options of the Device You can set the options (paper supply drawers, finisher, etc. When using the device for the first time or changing the options of the device, the options must be set in order to be able to use the functions of the device. 17) ● Confirmation of driver names corresponding to the device For driver names corresponding to devices, refer to the Readme file. Procedures 1 2 3 Display the [System Preferences] dialog box of the operating system → click [Printers & Scanners]. 4 In the displayed dialog box, check the options of the device → click [OK]. 29 Installing the Driver NOTE ● Select only the options that are actually installed in the device. — For information on operating the device, check the manual of the device. Related Topics Preparations for Using the Driver(P. 26) 30 Installing the Driver Uninstalling a Driver This explains the procedure for uninstalling a driver that is no longer needed. [. . . ] related Topics Installing the Driver(P. 16) 49 Troubleshooting Printing is Slow If transmission takes a long time when sending data to the device, it could be caused by the following. follow the instructions described in "Remedy. " Cause The amount of data being sent to the device is large, such as a document containing color photographs or large images Remedy If the resolution of the image is higher than needed, set the resolution to an appropriate value in the [Basic] panel > [Settings] > [Quality]. [. . . ]