User manual CANON I550

[. . . ] The print head holder Ink Tanks BCI-3eC Cyan BCI-3eM Magenta BCI-3eBK Black BCI-3eY Yellow automatically moves to the center. Remove the protective tape. 4 Gently slide the print head into the holder. The print head will rest at a slight angle. [. . . ] Remove the protective tape. 4 Gently slide the print head into the holder. The print head will rest at a slight angle. Do not press it down. 5 Close the front cover. Open and pull out the paper rest and the output tray. Parallel Cable Protective tape 5 Lower the gray lock lever until it locks Serial number Documentation and Software Kit into place. Secure Wire Clips NOTE: The "i550 Setup Software & User's Guide" CD-ROM contains printer drivers, software applications and electronic manuals. Write down the serial number located to the right of the print head. You will need this later to register the product. Parallel Cable Parallel Port Continue with Step 6 on side two. 6 Install the Printer Driver (Windows ) ® 6 6 When the driver installation is complete, Install the Printer Driver (Macintosh®) 7 Align the Print Head 7 From the Application folder, double-click on 7 1 Be sure to TURN THE PRINTER OFF before M ac in to sh W in do ws continuing. POWER Button POWER Lamp Off click Finish. IMPORTANT: Drivers included with this printer support Mac 8. 6-9. x. For Mac OS X driver and instructions, go to www. canontechsupport. com. NOTE: Screen shots may differ depending on the operating system used. the software to be installed. Follow the onscreen instructions. Before using the printer, align the print head to ensure the best quality printing. 1 Load a stack of blank paper in the 7 Register your product to ensure product paper rest. 2 Start the alignment procedure. support. Click the Utilities button. 11 Close the Chooser. with Step 7 Align the Print Head. 3 Read the License Agreement, then click c. Select Test Print from the pull down menu. Click the Print Head Alignment icon. Yes to continue. 4 When the main menu appears, click 5 If the message "No other applications can be NOTE: Register your product at www. registercanon. com to ensure product support. Install. running. . . " displays, click Continue. 12 To ensure highest quality output, continue with Step 7 Align the Print Head. 6 When the "Installation was successful" screen displays, Restart your computer. 5 When the Printer Port window appears, TURN THE PRINTER ON. The software will begin identifying the printer port being used. e. Follow the on-screen instructions to complete print head alignment. 3 Click OK (Windows) or Close (Macintosh) when finished. IMPORTANT: If your computer can not detect a printer port, refer to the Troubleshooting chapter in the i550 Quick Start Guide for instructions. QA7-2270-V01/082002A ©2002 Canon U. S. A. , Inc. Canon is a registered trademark of Canon Inc. [. . . ] Follow the on-screen instructions to complete print head alignment. 3 Click OK (Windows) or Close (Macintosh) when finished. IMPORTANT: If your computer can not detect a printer port, refer to the Troubleshooting chapter in the i550 Quick Start Guide for instructions. QA7-2270-V01/082002A ©2002 Canon U. S. A. , Inc. Canon is a registered trademark of Canon Inc. [. . . ]