User manual CANON I865

[. . . ] The print head holder automatically moves to the center. Remove the protective tape. 5 Close the front cover and extend the 3 Pinch the paper guide and slide it to the left. paper rest and paper output tray. Paper Rest i 860 Series Print Head Load a sheet of blank paper in the paper rest. Slide the guide toward the left edge of the paper. Protective tape 5 Lower the lock lever and press it down until it clicks into place. Serial number Paper Guide Ink Tanks BCI-6Y Yellow BCI-6BK Black BCI-3eBK Black BCI-6M Magenta BCI-6C Cyan click 5 Write down the serial number located to Paper Output Tray the right of the print head holder. [. . . ] Slide the guide toward the left edge of the paper. Protective tape 5 Lower the lock lever and press it down until it clicks into place. Serial number Paper Guide Ink Tanks BCI-6Y Yellow BCI-6BK Black BCI-3eBK Black BCI-6M Magenta BCI-6C Cyan click 5 Write down the serial number located to Paper Output Tray the right of the print head holder. You will need this later to register the product. NOTE: The printer will perform a print head cleaning after the cover is closed. Continue with Step 6 on side two. 6 Windows Printer Driver Installation and Print Head Alignment ® 6 M ac in to sh Mac® OS X Printer Driver Installation and Print Head Alignment NOTE: For Mac OS 8. 6 to 9. x printer driver instructions, refer to the "Appendix" of the Quick Start Guide. 10 When the message asking you to align the 7 Optional Photo Paper Tray 1 With the paper rest open, pinch and slide W in do ws 1 Be sure to TURN THE PRINTER OFF before 6 Register your product to ensure product 1 Turn on your Mac and your printer and continuing. POWER Button POWER Lamp support. Follow the on-screen instructions. insert the "Setup Software & User's Guide" CD-ROM. print head appears, click OK. the paper guide to the left end. Paper Guide 7 When the Terminate Installation window appears, click OK. 8 When the software menu appears, click 2 Double-click the CD-ROM icon, then the Mac OS X folder, then the Printer Driver folder. Install and follow the on-screen instructions. 11 Start the print head alignment procedure. a. Double-click the Macintosh HD icon, then Applications folder. Double-click the Utilities folder, then the Print Center icon. NOTE: For Windows® XP or Windows 2000, log on to Windows as an Administrator before continuing. 2 Install the Photo Paper Tray. When the Printer List screen appears, select i860, then click the Configure icon. 3 Double-click the i860 210. pkg icon. Paper Tray along the paper rest and insert it until it clicks into place. IMPORTANT: If you see the Found New Hardware Wizard, click Cancel. 9 When the Terminate Installation window c. When a message asking 12 Click OK to exit the Maintenance tab. Print head alignment is now complete. 5 When the Printer Port window appears, for your confirmation to proceed with the installation appears, click Continue Installation. 5 If you want to remove the Photo Paper Tray, TURN THE PRINTER ON. The software will begin identifying the printer port being used. 14 Follow the on-screen instructions. When the turn the knob so that it points at REMOVE and push the lever up while lifting the Photo Paper Tray out. "Installation has finished" screen appears, click OK. 15 Register your product to ensure product 9 When the message "The software was support. Double-click on the Product Registration icon, found in the Mac OS X folder. Follow the on-screen instructions. Lever successfully installed" appears, click Restart. IMPORTANT: If your computer cannot detect a printer port, click Help and refer to the online instructions. Part No. [. . . ] Follow the on-screen instructions. Lever successfully installed" appears, click Restart. IMPORTANT: If your computer cannot detect a printer port, click Help and refer to the online instructions. Part No. QA7-2895-V01 © 2003 Canon U. S. A. , Inc. [. . . ]