User manual CANON I905D

[. . . ] All statements, technical information and recommendations in this manual and in any guides or related documents are believed reliable, but the accuracy and completeness thereof are not guaranteed or warranted, and they are not intended to be, nor should they be understood to be, representation or warranties concerning the products described. Specifications are subject to change without notice. As an ENERGY STAR partner, Canon U. S. A. , Inc. , has determined that this product meets the ENERGY STAR guidelines for energy efficiency. All information regarding non-Canon products was compiled from publicly available information. [. . . ] Use Windows Explorer to ensure that the CD-ROM can be read. Ensure that the CD-ROM icon is displayed on the desktop. If there is any problem with the CD-ROM contact the Customer Care Center. CD-ROM, Unable to proceed beyond the Printer Port Screen Reinstall the printer driver 1. When the Terminate Installation screen is displayed, click OK OK. Carefully follow the procedures described in the Easy Setup Instructions and reinstall the driver. 43 Troubleshooting Print Quality is Poor or Contains Errors Problem Possible Cause Try This Check that the ink tanks are firmly seated in the print head and reset them if necessary. · Check to see if all the orange tape has been peeled off as shown in (1). If there remains a part of the orange tape as shown in (2), remove it thoroughly. Ink does not eject Ink tank is not seated properly/Printing is properly/Ink tank is Blurred/ Colors are empty Wrong / White Streaks appears / Printed Ruled Lines are Displaced If an ink tank is empty: See "Replacing an Ink Tank on page 28 Tank" Replacing Print head nozzles Print the nozzle check pattern to check for uneven ink output. clogged or misaligned When a specific color is missing from the nozzle check pattern, clean the print head. · If the ink supply is uneven: See "Print Head Cleaning" on page 36 Print Cleaning · If straight lines are misalign: See "Aligning the Print Head on page 40 Head" Aligning Note The ink tank may be clogged with dust or air if the protective cap is replaced after the removal. Media not loaded with Check that your paper is loaded with the correct print side facing up. See "Media Types Suitable for Borderless Printing" on page 21 Media Printing See "Media Types Suitable for Borderless Printing" on page 23 Media Printing Note If the printed surface is still scratched When printing on thick paper, enable the setting to prevent paper abrasion which will widen the space between the print head and the paper, and try printing again. Check the printer driver settings. See "Opening the Printer Properties Dialog Box Directly from the Start Menu on Menu" Opening page 11 2. Click the Prevent paper abrasion check box and click Send Send. Click OK when the confirmation message appears. Double-click the hard disk icon where the printer driver was installed, the Application folder, and then the Utilities folder. Select i900D from the Name list and click Configure Configure. Select i900D from the Product list and click Select Select. Select Custom Settings from the pop-up menu. Click the Prevent paper abrasion check box. 45 Troubleshooting Troubleshooting Printer Hardware Problem Printer Does Not Start or Printer Stops During Print Jobs Possible Cause The card slot is write-enabled. Try This If the card slot is write-enabled using the Memory Card Utility or BJ Utility, "Card Slot is Write-Enabled" appears on the LCD and printing is disabled. Change the card slot setting to the read-only mode. Check that a memory card is not inserted in the printer. [. . . ] 38 print head holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Print Media to Avoid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Print Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Print Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]