User manual CANON IMAGECLASS D1180 DATASHEET

[. . . ] It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment, such as computers, monitors, printers, fax, machine, copiers, and scanners. The standards and logos are uniform among participating nations. European Union (and EEA) only. This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Directive (2002/96/EC) and your national law. [. . . ] Refer to the documentation for the SCSI card and the computer. Make sure that the SCSI card is correctly installed in the computer and that it is enabled properly under the operating system in use. The scanner’s SCSI ID is identical to the SCSI ID of another device. Check the SCSI IDs of all SCSI devices connected to the system and set a unique SCSI ID for the scanner. 2-12. ) The terminator is not set correctly. Shut down both the PC and the scanner, and then turn the scanner ON first, and then the PC. 2-12. ) There is a problem with another SCSI device that is connected in the daisy chain. Do not use the daisy chain connection configuration. 2-12. ) The PC was turned ON before the scanner. Shut down both the PC and the scanner, and then turn the scanner ON first, and then the PC. If the scanner is not ON, shut down the PC, then turn the scanner ON first, and then the PC. Before you place your document, thoroughly fan the stack of papers. (See “3-3 Placing Documents, ” on p. 3-5. ) 5-3 Chapter 5 Troubleshooting Problem Solution Attempting to scan a document of a size, thickness, or weight that the scanner cannot scan. Check the size, thickness, and weight of the document. For precautions concerning documents, see “3-1 Documents, ” on p. The rollers inside the scanner are dirty or worn. Clean the rollers, see “4-1 Regular Maintenance, ” on p. If the rollers are worn, then they need to be replaced. Contact your local authorized Canon dealer or service representative to purchase a roller replacement kit. Problem Solution IMPORTANT The retard roller and roller unit are consumable components. You need to replace the retard roller and roller unit when cleaning does not appear to improve performance. Contact your local authorized Canon dealer or your service representative about purchasing a roller replacement kit, and then replace the retard roller and the roller unit. ✘ Saved Image Files Do Not Open When image files saved by CapturePerfect 3. 0 cannot be opened by other applications, the probable causes are as follows. [. . . ] 7-18. ) 9-5 Chapter 9 Practical Examples • To skip or enhance a custom color Select [Drop-out color Custom] or [Custom color Enhance] in the [Color drop-out] list on the [Image processing] tab sheet to open the [Color Settings] dialog box. Here you can specify the range of colors to be dropped out or enhanced. (See “Color Drop-Out, ” on p. 7-18. ) • To enhance contours in images Adjust the [Edge Emphasis] setting on the [Image processing] tab sheet. [. . . ]