User manual CANON IMAGECLASS MF5950DW BROCHURE

[. . . ] 1-3 Chapter 2 Functions of the Media Configuration Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 The Functions of the Media Configuration Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Replacing all of the printer and printer driver media information at once . . . . . . . . . . . . . . . . . . 2-1 Adding user defined media types to the printer and printer driver media menus . . . . . . [. . . ] Click the Cancel button to cancel adding the media type. 4. Communication with the printer starts and the following dialog box is displayed. Important Do not attempt to print or turn the off while the program is communicating with the printer. · When the program cannot communicate with the printer, the following warning message is displayed. Read the message and click the OK button. Note · When there are already over 64 media types saved in the printer driver, the following warning message is displayed. You can add more media types after you have deleted unnecessary media using the Edit Media Type wizard. Refer to Chapter 5 "Editing Media Types" (p. 5-1) for more information on how to edit media types. 4-2 Media Configuration Tool Guide Chapter 4 Adding Media Types When the program is done communicating with the printer, the screen moves to display Add Media Type: Enter Media Type Name. Input Media Name You can input the name of the media you have added here. The names you enter here display on the Printer driver, the Printer operating panel and the Remote UI. Indicated below are the conditions for inputting media names. Media Name Name of Media Type Displayed on Printer Driver Name of Media Type Displayed on Printer Operating Panel Name of Media Type Displayed on Remote UI · · · · Conditions You can input up to 32 characters. You can input up to 15 alphabet or numerical characters. You can input up to 31 alphabet or numerical characters. Important You cannot input "\" (back slash). The following settings are available for drying time in Between Scans. Between Scans No, 1 sec. , 3 sec. , 5 sec. , 7 sec. , 9 sec. Setting For media that has problems, such as ink smears on the page or colors that seem uneven during borderless printing etc. , increase the value for this setting. 4. Set the Roll Paper Margin for Safety of the media type to be added. Set the length of the near end margin for the roll paper from the Near End Margin list in Roll Paper Margin for Safety. The following settings are available for Near End Margin. Near End Margin 5 mm 20 mm Setting For media that has no problem when printing with a standard size margin. For media that has a strong tendency to curl, causing the printhead to scratch the surface. b. Set the length of the far end margin for the roll paper from the Far End Margin list in Roll Paper Margin for Safety. 4-5 Media Configuration Tool Guide Chapter 4 Adding Media Types The following settings are available for Far End Margin. Far End Margin 5 mm 10 mm Setting For media that has no problem when printing with a standard size margin. When printing an image at the very end of the end margin, the cutter touches the page before the ink has dried and dirties the printed image. [. . . ] From the Media Types list select the media that you would like to change the name of, and double click. The Enter Media Type Name dialog box is displayed. b. Input the Name of Media Type Displayed on Printer Driver. Input the Name of Media Type Displayed on Printer Operation Panel. [. . . ]