User manual CANON IMAGEFORMULA P-208II SCAN-TINI PERSONAL DOCUMENT SCANNER IMAGEFORMULA P-208II USER MANUAL

[. . . ] Please read this manual before operating this scanner. After you finish reading this manual, store it in a safe place for future reference. CE-IM-0937-1. 10 Contents Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Click to display the list of panel types. The selected type of the panel is created. Edit [Select document] panel The [Select document edit screen] opens when you click the [ the [Select document] panel. ] button in Click [Rotate] to display. The scanned image can be rotated in 90 degrees to the left or the right. The rotation can be adjusted according to the preview image. (5)Information Display Area The information regarding the "Select document" and "Select output" is displayed. Click the button, and the Output Settings dialog will appear. Click the [Scan more pages] button to continue the scanning. Clicking the [Cancel] button will destroy the scanned images and return to the top screen. When clicking the [Finish] button, the output processing will start. After it is completed, the screen will return to the top screen. 38 Scan settings Makes the scan settings. [OFF] [Straightens with angle of fed documents] [Straightens with angle contents of fed documents] [Color mode] Select the color mode for scanning from below. Detect automatically 24-bit Color 24-bit color (photograph) Grayscale Grayscale (photograph) Black and White Automatically determines the color mode based on the document content and scans accordingly. Scans the document in color using photocompatible tones. Scans the document in color using photocompatible tones. Scans the document in black and white (binary). [Rotate image to match orientation of text] Check [Enable] on to rotate the image in the same direction with the characters. [Use advanced settings dialog box] Document scan settings include basic items that are configured in [Scan settings], and the settings that are configured in the advanced settings dialog box. The settings in the advanced settings dialog box are applied for settings other than the basic items. Enable [Use advanced settings dialog box] to implement advanced scanner settings other than the basic items using the advanced settings dialog box (scanner driver). To open the scanner driver, enable this item, and then click the [Settings] button. [Page Size] Select the paper size of the document to be scanned. If you specify [Match original size], the page size of the scanned document is detected and the images are saved at the detected size. [Dots per inch] Select the resolution. Select [Detect automatically] and the software will automatically scan the document at the optimum resolution. The driver settings dialog box includes setting items that are the same as the basic items in [Scanner setting], but the setting for each of the them is stored separately. Which settings are used during scanning differs as follows depending on the setting of the [Use advanced settings dialog box] check box. Setting of [Use advanced settings dialog box] OFF Basic items Settings of [Scanner setting] Other than basic items Settings of the advanced settings dialog box of the scanner driver [Scanning Side] Select the scanning side of the document. If you select [Skip blank page], scanned images of blank pages are not saved. [Automatically straightens skewed images] If a document is not straight when fed, the scanner detects that the document is not straight from the scanned image and straightens the skewed image. Select the setting from below. ON Settings of the advanced settings dialog box of the scanner driver For the advanced settings other than the basic items, see the help in the driver settings dialog box. 39 General Set the following items as occasion demands. Name Enter the name to be displayed in the select document panel. Icon You can change the select document icon displayed in the scan mode panel. Enable [Change icon] to enable the [Settings] button and select the file. [. . . ] Specify the same size as the card (or [Match original size] (Windows) or [Autodetection](OS X)), then scan. For details, see "Loading cards" on p. 27 How do I print scanned data?  CaptureOnTouch • • • For both Standard Scanning and Scanning Shortcut, select [Print] in the [Select output] panel. To use this function, you need to install a plug-in. The plug-in can be installed by selecting its checkbox when installing CaptureOnTouch. How do I load and scan documents with mixed sizes? Set [Page Size] to [Match original size] on the scanner driver settings screen, then scan. [. . . ]