User manual CANON IMAGEPASS-C2 MAC OS X V1.40 FAX GUIDE

[. . . ] · To view the manual in PDF format, Adobe Reader/ Acrobat Reader/ Acrobat is required. If Adobe Reader/ Acrobat Reader/ Acrobat is not installed on your system, please download it from the Adobe Systems Incorporated website (http://www. adobe. com). How the Manual Is Organized Chapter 1 Chapter 2 Chapter 3 Before You Start Specifying the Network Settings Appendix Includes troubleshooting, network settings, software information, the glossary and the index. Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions. However, as we are constantly improving our products, if you need an exact specification, please contact Canon. Contents Preface . . viii Chapter 1 Before You Start System Environment Requirements . [. . . ] If selecting [Off] for [Use DHCP], [Use BOOTP], and [Use RARP], the machine does not check the protocols. If neither DHCP, BOOTP, nor RARP can be used, the IP address specified in [IP Address] is allocated. IMPORTANT For this machine, in addition to direct allocation of the IP address to the machine, you can use DHCP, BOOTP, or RARP to specify the IP address. When the machine is started or reset, it checks whether DHCP, BOOTP, or RARP is being used, and then allocates the IP address using the first available setting method. NOTE · Checking whether DHCP, BOOTP or RARP can be used takes about 1 to 2 minutes; it is recommended you set unused protocols to <Off>. · Depending on whether you use DHCP, BOOTP, or RARP to allocate the IP address, you need to start the DHCP server, BOOTP daemon, or RARP daemon. 2 Specifying the Network Settings 6 Specify [IP Address], [Subnet Mask], and [Gateway Address]. In [IP Address], enter the machine's IP address. In [Subnet Mask] and [Gateway Address], enter the subnet mask and gateway address used by the TCP/IP network. NOTE If you are using DHCP, BOOTP, or RARP, some of the items above are not used. The values obtained from DHCP, BOOTP, or RARP are used. 7 Select <Auto Detect> or <Manual Detect> for [Ethernet Driver Settings]. If you want to specify the ethernet driver settings automatically, select <Auto Detect>. To specify the settings manually, select <Manual Detect>. You can specify the communication mode and ethernet type from [Communication Type] and [Ethernet Type] when <Manual Detect> selected. 8 Specify the protocol settings for printing. To use [Use Raw Print] or [Use LPD Print], select [On]. Protocol Settings 2-13 9 Click [OK]. The settings become valid after you restart the machine. The protocol settings are complete. 2 Specifying the Network Settings 2-14 Protocol Settings Setting Up a Computer for Printing After you have completed the protocol settings of the machine, you are ready to set up each of the computers for printing. Connecting to a TCP/IP Network All computers that use the printer must have TCP/IP client software installed and must be enabled for TCP/IP network use. Press [ (-)] or [ (+)] to select <ON> press [Set]. Specify the RAW port number (default: 9100) using the numeric keys press [Set]. 5 Install the printer driver. (See the Software Guide. ) Setting Up a Computer for Printing 2-17 6 If you are using LPD, change the port configuration information. Click the [Ports] tab to display the [Ports] sheet. Click [Configure Port]. 2 Specifying the Network Settings Select [LPR] under [Protocol], enter "lp" in [Queue Name] under [LPR Settings] click [OK]. NOTE If you are using Raw, this step is not required as the default protocol setting is <RAW>. 7 Click [OK] to enable the settings. The printer destination settings are complete. 2-18 Setting Up a Computer for Printing Print Server Settings If Windows 2000/XP/Server 2003 is on your network, the following procedure enables you to set up a print server for more efficient management of network printers. Once a print server is set up, print jobs can be managed by the print server. Also, by setting up an alternate driver for the print server, printer drivers can be installed in each computer via the network. 1 Click [start] on the Windows task bar select [Printers and Faxes] (Windows 2000: [Start] [Settings] [Printers]). Right click the corresponding printer driver icon. On the pop-up menu, click [Sharing]. 2 Specify the Sharing settings. Select [Share this printer] (Windows 2000: [Shared]) enter a share name. If you are using Windows 2000/XP, click [Additional Drivers] select the printer driver you want to install. Click [OK]. Setting Up a Computer for Printing 2-19 Specifying the Network Settings In the Printer Driver Properties dialog box, display the [Sharing] sheet. 2 When the alternate driver is installed, additional windows will open for entering the location of the file containing the printer driver. Follow the instructions in these windows. NOTE To install the printer driver on another computer, use the [Printer Wizard] window for selecting the printer destination select [Network printer] select the shared printer for the computer selected in the print server. 2 Specifying the Network Settings The shared printer settings are complete. 2-20 Setting Up a Computer for Printing Printer Management The machine enables you to use any of the following software to check the status and to specify the settings on your computer. ·A web browser (Remote UI) Device Installer (Canon utility software included in the User Software CD) Console (via a web browser) · NetSpot · NetSpot 2 Specifying the Network Settings NOTE The utility software of the NetSpot Console is not included in the User Software CD. [. . . ] A 32-bit numeric address used by IP (internet protocol) to specify a computer on the Internet. The IP address is usually written as four numbers separated by periods. An example is 128. 121. 4. 5. LAN Local Area Network. It is a network system formed by linking a server, workstations, and computers, which are all located in the same building or some other relatively limited area. Log in Entering a user name and password as a means of user authentication to start a computer session or access to a service. LPD Line Printer Daemon. [. . . ]